Jump to content
SAU Community

Recommended Posts

The Ndsoc, Is holding a Drag day @ heathcote on the 27th of october which is open to all Nissan's and datsun's,

I Have also invited teh 31 skylineclub, i would like very much to see the skyline boys all come down and show the Z boys how its really done,

There will be a Best Burnout prize and Fastest time Prize.

If i could get some firm indication from those who will be attending that would be great.

Cheers,

Mastadd

Link to comment
https://www.sau.com.au/forums/topic/184724-drag-day-invite/
Share on other sites

The Ndsoc, Is holding a Drag day @ heathcote on the 27th of october which is open to all Nissan's and datsun's,

I Have also invited teh 31 skylineclub, i would like very much to see the skyline boys all come down and show the Z boys how its really done,

There will be a Best Burnout prize and Fastest time Prize.

If i could get some firm indication from those who will be attending that would be great.

Cheers,

Mastadd

What sort of support are the NDSOC members showing to this day?

The last drag day held by the club the turnout was pretty disappointing, I'm considering heading up, but not if there is only going to be a handful of cars there.

Link to comment
https://www.sau.com.au/forums/topic/184724-drag-day-invite/#findComment-3368694
Share on other sites

What sort of support are the NDSOC members showing to this day?

The last drag day held by the club the turnout was pretty disappointing, I'm considering heading up, but not if there is only going to be a handful of cars there.

This time were @ heathcote, so we should get a better turn out and its not in the middle of summer @ 40 Degrees! lol

The R31 skyline club is coming there are about 10 confirmed peoples at the moment,

I’m Expecting a similar turn out from the NDSOC, so with a few of you guys coming up it should be a good turnout.

Link to comment
https://www.sau.com.au/forums/topic/184724-drag-day-invite/#findComment-3369422
Share on other sites

  • 4 weeks later...
do you have to be an ndsoc member to go?

I'd love to bring one of my cars along to this, but I'm not a member?

You don't need to be a member...

Just turn up on the day.

I might even come for a look and have a run or 3

Link to comment
https://www.sau.com.au/forums/topic/184724-drag-day-invite/#findComment-3425394
Share on other sites

I have checked their site, and they say a car must be road worthy. Ahhh What defines roadworthy? LOL How about safe? I have all brakes, suspension, tires, seatbelts, some interior...but my car doesnt exactly meet emissions or noise requirements. Do you think this would be a problem?

Edited by 33gtst
Link to comment
https://www.sau.com.au/forums/topic/184724-drag-day-invite/#findComment-3427825
Share on other sites

I have checked their site, and they say a car must be road worthy. Ahhh What defines roadworthy? LOL How about safe? I have all brakes, suspension, tires, seatbelts, some interior...but my car doesnt exactly meet emissions or noise requirements. Do you think this would be a problem?

Sorry When i say Roadworthy i mean Safe, lol Basicly what you have described, and no lose stuff Inside the car that could fly around down the strip.

UPDATE!!!

Time:

Gates open - 9am

Scruteneering - 10am

Racing starts - 11am - 4pm

Cost: $40 to race. $15 to spectate.

Payable on the day at the gate

Car must be "roadworthy"(Safe) to pass scrutineering and you must be suitable dressed with ankle to wrist, non flammable materials. Helmets and proper footwear are required to participate on the day.

This Day is For having a good, fun day out. So bring family and friends.

Link to comment
https://www.sau.com.au/forums/topic/184724-drag-day-invite/#findComment-3428019
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...