Jump to content
SAU Community

Recommended Posts

HKS graphic fuel controller. basic 5 knob adjustment. +/- 20% range I think from memory. Perfect working order $200

Pair of RE040potenza's 225'45 R18's. approx 70% tread remaining.

I have for sale an 80mm Trust cat back exhaust for an R33 GTR, its full stainless with the obligatory cannon muffler. Immaculate condition besides some rubber marks from burnouts, it also lines up perfectly with my R32 but the rear muffler hangers need modifying to suit the R32 $500

80mm HKS cat back exhaust for an R32 GTR, its mild steel with a nice center muffler and large cannon muffler at the rear. $400

70mm Stainless cat back exhaust for an S13 silvia. Fits fine unsure of where it came from but clean with no dents etc $200

A near near Blitz ID3 boost controller, 100% complete and in working order. Has been in car for 12 months but not really used. No marks on controler what so ever its perfect condition $450

Bolt on Just jap upgrade GTR intercooler. Litterally brand new direct bolt on. 100mm thick. $300

Brand new Jap brand Short shifter for an R32/33 transmission. Not 100% sure of brand but its all there, never installed into my GTR as its for a GTS-t $50

Pair if R32 GTS headlights. These look identical to GTR N1 lights but actually came from a GTS base model. I never installed them and since the car will never see the road again I have no use for them perfect condition no marks or scatches $100

Full set of prepared R33 GTR Rods. Have been close and honed, little ends checked, new OEM studs and nuts. Never used since serviced $200

Full set of stagea 16 inch forged wheels. They are the mesh design rims with BRAND new falken tires. No marks or gutter rash on any of the rims $200

Set of R32 GTS-t front brakes, freshly machined rotors and approx 70% pad remaining. $250

I also have 6 month old Trulli Kart chassis for sale bu PM me details etc.

All parts are located in sydney, can deliver to the local area, and negotiable on some parts

Brad

Edited by Risking
Link to comment
https://www.sau.com.au/forums/topic/184795-gtr-parts/
Share on other sites

Hi man

I am interested in the pair of gts head lights were are you and if they are in good condition i will buy and pay postage.How much do you recon postage would be?

regards stuart

Edited by NISSANGTS
Link to comment
https://www.sau.com.au/forums/topic/184795-gtr-parts/#findComment-3347187
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...