Jump to content
SAU Community

Recommended Posts

i have a r33 gtst. do u think its worth getting coilovers instead of normal kingsprings

i was quoted $400 for kingsprings+labour..but im thinking if i get adjustable coilovers it will save me trouble having to replace them when i get canaried.

i found this link of coilovers

http://www.raceinspired.com/pc-8734-20-d2-...-1995-1998.aspx

what do use think,,i cant decide lol

anyone got experience, or know which would be more worth it

thx

Link to comment
https://www.sau.com.au/forums/topic/184908-should-i-get-coilovers/
Share on other sites

definantly get coilovers, maybe not the ones you have linked, all i can say is get what you pay for

why is it more worth it though?

is this because u can adjust it really low and looks better,,or because it performs better.

i dont really care about handling because im happy with the handling my car has already and thats just stock springs.

??

Yes.

I made the mistake of just buying dampers, thinking I could get springs later. In the end, I ended up getting coilovers as it was hard to find springs at the exact rate and height I wanted, to match the dampers and my desired ride height.

i dont really care about handling because im happy with the handling my car has already and thats just stock springs.

But if you change your suspension components your handling characteristics change. Putting in aftermarket suspension won't necessarily make your car handle better. Putting in heavily lowered springs by themselves can, and frequently does, make the car handle worse.

This is not to suggest that coilovers are only for track use, but if you're only doing it to lower your car, it's probably a waste of money as springs and shocks would be cheaper and probably give you a better ride for street driving. The only advantage to coilovers is the adjustability factor and if you're not 'bothered about performance' you may as well go for a properly matched spring/shock combination and save some coin.

Edited by baron25

I take my car to the track now and then, and I like a rigid feeling suspension... so I'm running a stiffer spring and adjustable dampening strut (street and track)... I've also lowered the car about an inch. If you know the right setting and you don't want to change it, there's no reason in the world to get adjustable coilovers (and technically a spring over a strut is a coilover, as its a spring "coil over" a strut).

If you're not the type of person that needs his suspension adjusted every month for different tracks etc then there's no reason why you'd need em. I find most people do it just to keep up with the Jones'. The added benefit of staying on spring n strut setups is that its legal, adjustable coilovers are a bit tricky to make legal due to their adjustability.

That said finding the suspension setup that's just right can be difficult at first, talk to a very good suspension shop and they should be able to sort you out.

I would have to agree with funky. Only thing is if you get the kings springs you will find that they will bottom out quite easily on things like speedbumps with stock shocks.

I'm running kings lows with stock gtr shocks at the moment, was advised before I put them in that it might be an issue but as usual had to learn the hard way. Looking at just replacing the shock with a set of koni or bilstein as the spring setup I quite like.

James.

Edited by heller44

i dont realy care about track use,,,the only reason i want adjustablity is so i can easily adjust it when i got canaried. if i get kingsprings i have to pay extra labour in taking the springs off and replacing the stocks,,then changing them back after i get cleared. such a hassle

hey mate if i was you i will either get Coilover or the package from Sydneykid.

the reason is that the ride with just spring will change. It is accually becomes bad, and when driving above the limits

especially in a high preformance car you need handling and i know it is not track

Also most KIDS who have accidents and die on these road are because they have crap suspension.

Try Driving on the hume highway (bass hill) with just king springs........Trust me kidney Failure.

the only reason i want adjustablity is so i can easily adjust it when i got canaried. if i get kingsprings i have to pay extra labour in taking the springs off and replacing the stocks,,then changing them back after i get cleared. such a hassle

Ummm.... just playing devil's advocate here, but exactly why are you planning on a defect? Why not just go legal? It still costs money to get a defect cleared, and chances are they'll find other things to be fixed for the RWC too.

the reason is that the ride with just spring will change. It is accually becomes bad, and when driving above the limits

especially in a high preformance car you need handling and i know it is not track

Hit the nail on the head there, which is why you don't buy just springs - you need the matched shocks

go the SK package.

i dont realy care about track use,,,the only reason i want adjustablity is so i can easily adjust it when i got canaried. if i get kingsprings i have to pay extra labour in taking the springs off and replacing the stocks,,then changing them back after i get cleared. such a hassle

well if you plan to get canaried then you shouldn't get adjustable coilovers as they're a defectable item, even if they're set to a legal ride height. to clear this you need to take the whole strut out and put standard ones in anyway. So either way you'll have to do it :laugh:

Since you are getting springs and shocks, I would really strongly suggest the sydneykid bilstein spring and shock packages in the groupbuy section, they are matched nicely valving and spring weight for your car, as well as having circlip height adjustment. If you can get ahold of it.

Value for money mate.

king springs, plus the cost of a set of bilsteins or koni's to match will set you back the same amount of a bit more and still be not as nice to drive.

personal opinion though.

james.

(I've got kings lows and going koni's very soon)

well if you plan to get canaried then you shouldn't get adjustable coilovers as they're a defectable item, even if they're set to a legal ride height. to clear this you need to take the whole strut out and put standard ones in anyway. So either way you'll have to do it :laugh:

Mate i dunno where you got your information from

but when coilover are set to a legal height they are not defectable

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...