Jump to content
SAU Community

Recommended Posts

is it? I am aware of thinner wheel 45 instead of original size 50. It may be totally offset from orginal tyre but just minor affect on the speed...

I though the original tyres are 215/55-17? if so a 235/50-17 will be the closest overall diameter.

A 235/45-17 tyre will put your speedo and odo out by about 4%

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

+1 yup wot he said. So when your speedo reads100kph you're actually only travelling at 96.3kph. On the bright side that's in your favour when going thru a multinova and you'll clock up less K's on the odo than you will actually do :thumbsup:

Edited by mosoto

+1 yup wot he said. So when your speedo reads100kph you're actually only travelling at 96.3kph. On the bright side that's in your favour when going thru a multinova and you'll clock up less K's on the odo than you will actually do :thumbsup:

So if speedo reads 100kph and actually travelling at 96.3kph wont that mean that odometer reading of 100km will actually be only 96.3km travelled and hence will clock up 4% more kms than the odometer reads????

So if speedo reads 100kph and actually travelling at 96.3kph wont that mean that odometer reading of 100km will actually be only 96.3km travelled and hence will clock up 4% more kms than the odometer reads on the odometer????????

FIXED.

but yup you're right sorry my bad..............DOWNSIDE you'll clock up more K's on the odo than you've actually done.

Hey guys just my two cents, i run achilles on my V35 (sedan) 245/35r20, for the price they are they are awesome tyres done 20000 on them daily driving (i drive pretty hard on em too) got at least another 30000 left in them and and they stick like glue and have like no road noise. Also i better mention that we at bridgestone have just launched 2 new tyre ranges the MY01 and the Turanza serenity, but i cant vouch for them personally yet as i havent even seen them yet because we only released them on the 3rd of this month

  • 2 years later...

Hi Guys, I had one of my front tyres punctured (Bridgestone Potenza) and need a new tyre to replace that without having to spend too much. I have been quoted Sumitomo (HTR I think) $220 and Hankook K115 $190 fitted and balanced.

Any thoughts on that anyone?

By law your tyres must be rated to do a sustained speed equal to your car's top speed, regardless of whether that speed is legal or not.

I'd get that stuff right, as cops check that data when considering whether to defect your tyres as roadworthy or not.

What a load of rubbish.

The only legal requirements for tyre fitting are that the speed rating of Australian passenger cars be rated S or better and that the load index of the tyres meet or exceed the manufactures spec found on the tyre placard in the drivers door. There are other rules like tyre cannot ride outside of the body etc but basically if you meet or exceed the placard you are good to go.

FIXED.

but yup you're right sorry my bad..............DOWNSIDE you'll clock up more K's on the odo than you've actually done.

Sorry to hijack the thread but is it possible to get the speedo calibrated that it shows the correct speed?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...