Jump to content
SAU Community

Recommended Posts

Hey Guys,

Lady at work is having issues with her wrx (2001 model i think).

Apparently feels like its gonna stall if you accelerate heavily from a stop (leaving a set of lights) and sometimes at idle.

She took it to Subaru and first they said the whole turbo needs replacing (quoted $4000!), she talked to a turbo guy and he is gonna rebuild the existing turbo (for about $600 i think she said).

But now they saying part of the turbo is in the cat and they're saying 3 weeks for the part. and the computer is displaying a Lean (fueling i guess) code.

Questions:

1. Do WRX's have ceramic turbines (and fallen apart like some skyline owners have experienced?)

2. would this explain the stalling issue? and the lean issue?

Link to comment
https://www.sau.com.au/forums/topic/185668-wrx-issues/
Share on other sites

I have a 97 wrx and not sure if they changed the design at all.... buuuut... the CAT is in the exhaust dump from factory...ours had already been replaced... its literally pull dump off punch cat out and replace it in the exhaust where most cars have one! Unless they want to retain the factory setup then there is no need to replace the dump. Just go to any exhaust shop and have them place one in the normal spot....

And i was under the impression that they did not have ceramic turbines????? Il check my workshop manual/parts database and get back to you...... mine already had a VF34 hi-flow BB on it so I wouldn't have a clue what was stock on it!

Although if they are saying that part of the turbo is in the exhaust then its a strong possibility....

EDIT - re fueling.... unless the cat it completely blocked which might cause boost issues - eg it melted and is blocking air flow... that one has me stumped.. maybe unrelated??? maybe the cause of turbo failure???

Link to comment
https://www.sau.com.au/forums/topic/185668-wrx-issues/#findComment-3359558
Share on other sites

there are WRX forums.

2001 model rex (bug eye model) also has PRE CAT.

as in there is another Cat converter in the manifold from one sode of the engine to the other before it gets to the turbo.

$4000 for a TD04 is funny.

people have trouble selling them second hand for $200

I'd tell her to take it to a subaru specialist not a subaru dealer.

one drive in it and they would be able to tell what the problem is.

Link to comment
https://www.sau.com.au/forums/topic/185668-wrx-issues/#findComment-3359740
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...