Jump to content
SAU Community

Recommended Posts

Please Ban the next person that asks questions about the power they got from a dyno run/tune.

the arguements about how much power it made stock or, this dyno is happy and this one is sad is getting as bad as the f*king missfire at 4500rpm on boosted R33 uleh, or flutters bro type threads.

DYNO results have the following important information.

Boost v RPM graph - to see what RPM the boost gets to max set boost level and if it stays stable etc.

A:F ratio v RPM graph - to see if it's lean or rich and at what rev range.

torque v RPM graph - to see what revs the max torque is produced to work out what revs to change at to drop back in to the meaty part of the torque curve.

how many times have people said "a dyno is a tuning tool"

never sinks in.

the forum is flooded by morons going "I only got 180rwkw with 12psi and others got 200rwkw on same psi"

BAN BAN BAN!!!

Link to comment
https://www.sau.com.au/forums/topic/185812-suggestion-to-the-moderators/
Share on other sites

You're always gunna have people less experienced than yourself asking apparent silly questions.

Part of life and this forum...and the learning experience

i plead not guilty to the above but have asked dumb stuff in the past.

I think a 'Ban' is a bit exsessive.

Just don't read it.

Every question must look a bit stupid to someone like Nismoid31 or SydneyKid but the still have the patience to give advice or point them in the right direction.

Have a beer and put your feet up :thumbsup:

Take a deeeep breath, count to 10.....(1..2...3...) ahhh, thats better

It's not the noobs.

it's people that have already been here and have read it all.

it's not the noobs that say "I have a stock skyline, can I get a tune"

that's a fair noob question.

but comparing dyno figures... and lets admit it, there is a whole shit load of it that goes on here.

BAN.

No warning.

they go to refresh, BANG.. "you have been banned for life you f*king clown." message appears.

Seat of the Pantaloons dyno figure is just as acurate as a dyno power figure.

it doesn't mean anything anyway.

Please Ban the next person that asks questions about the power they got from a dyno run/tune.

the arguements about how much power it made stock or, this dyno is happy and this one is sad is getting as bad as the f*king missfire at 4500rpm on boosted R33 uleh, or flutters bro type threads.

DYNO results have the following important information.

Boost v RPM graph - to see what RPM the boost gets to max set boost level and if it stays stable etc.

A:F ratio v RPM graph - to see if it's lean or rich and at what rev range.

torque v RPM graph - to see what revs the max torque is produced to work out what revs to change at to drop back in to the meaty part of the torque curve.

how many times have people said "a dyno is a tuning tool"

never sinks in.

the forum is flooded by morons going "I only got 180rwkw with 12psi and others got 200rwkw on same psi"

BAN BAN BAN!!!

And this children, is how to have a rant. Please pay particular attention 1) controlled use of swearing in order to maximize it's effect, 2) Use of fact's to back the initial argument/premise of the rant and 3) general reference to external threads at which the rant is aimed.

If you are having a rant, do it properly.

Nice work GTST :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Congrats on the career change!  I did something similar at the start of the year too, left IT / corporate after nearly 2 decades. Soooo when's the motor coming out for the spark plug change?
    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
×
×
  • Create New...