Jump to content
SAU Community

Recommended Posts

I have the HKS Silent Hi-Power, it is not silent. Hate to think what the non-silent model sounds like. Has a nice rumble and sounds amazing at high revs but would be around the 100-110dB mark for sure

X2.

Interestingly enough, when i ordered my HKS from Nengun a year or two back, i was tossing up between the Trust PE2 or the HKS Hi-Power Silent. The photo they have listed for the HKS shows the exhaust with a center muffler. At the time they were similarly priced, and IMO looked identical so chose HKS for no apparent reason.

But as we both know, it comes with a straight pipe with im gonna go for an "illusion" of a resonator slightly bulging in the mid pipe, and the cannon on the rear. It was louder than i expected it to be but i was expecting a center muffler too.

It can be a tad droney on the highways at times, but if you keep it at a steady rpm it more or less goes silent.

When i listen to Lith's one side by side with mine and go for a drive i might keep my eye out for a Trust item to replace it with. But i do like that bark.... :ermm:

Theres nothing quite like winding down the windows in a narrow tunnel and listening to that RB roar at full boost!

Edited by gotRICE?
  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

When i listen to Lith's one side by side with mine and go for a drive i might keep my eye out for a Trust item to replace it with. But i do like that bark.... :ermm:

Theres nothing quite like winding down the windows in a narrow tunnel and listening to that RB roar at full boost!

We'll definitely sort that out - possibly sooner rather than later as it seems the reliable daily driver (my second one in just over 6 months) seems it may have decided to carnage itself so Moby will AGAIN be relegated to daily driver duties. If thats the case, I'll be down in Welly sooner rather than later to get woman.

With the mixture of turbo whistle and PE2 sweetness the Skyline would go down a treat in a tunnel. Hell a road with building on either side is pretty awesome :P

i have the same looking exhaust as MINTR33. a twin pipe looking thing from the cat back. mine however had 3 hotdogs, JASMA muffler with DTM tips. must say i hate the look of the tips :P

exhaust looks great from the rear and have numerous comments about it. sounds quiet enough to me. if anything i would want it a bit louder. might remove 2 hotdogs :ermm:

will be taking it down to my exhaust shop soon to remove the DTM tips and replace with 2 3 or (if i cna fit) 3.5 inch tips. if i have enough cash might remove hotdogs and see how it sounds :D

pics up soon

veeeeeeeeeeeeeeeery dirty!!! was on car in this condition when i bought it! wouldnt mind doing something to clean it up including the insides. any ideas??

post-53838-1237374554_thumb.jpgpost-53838-1237374579_thumb.jpgpost-53838-1237374603_thumb.jpg

looks crooked from rear shot cause its unbolted

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...