Jump to content
SAU Community

Recommended Posts

Hey guys got some r32 GTR Parts that came off my gtr as i have upgraded .

I have a set of Blown R32 GTR Turbos $100 Must Go..

Still Have my Standard R32 GTR Ecu With HKS F-CON S Piggy Back Ecu Suited for R32 GTR $150 Must go!!

I Have Standard r32 GTR Dump Pipes with Standard R32 Front Pipe $100

Also got a set of 6 Standard r32 GTR Pistons . Cylinder 6 Ring is Cracked. $100

Guys need these Gone A.S.AP Make offers !!! If you need Pics Give me your number and i will MMS them to you...

By the way i am In sydney.

Cheers guys..

Edited by MRGTR911
Link to comment
https://www.sau.com.au/forums/topic/186155-r32-parts/
Share on other sites

Might be interested in the ECU if i find out that it's my ECU stuffing up my std boost guage. Will you sell seperatley?

How good is the F-CON S on a standard GTR?

If your car is standard probably not a good idea to use the hks f con s. Mainly because the Ecu is used for a car with High Power, but then again i wouldnt have a clue might be best to ask your tuner .... You can still Use the standard Ecu though .... I mean i am pretty much giving them both away for $ 150 Bucks. they are worth atleast 600 used.. But i hjave no use for them....

Let me know how you go!!

Link to comment
https://www.sau.com.au/forums/topic/186155-r32-parts/#findComment-3377483
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...