Jump to content
SAU Community

Gtr Injectors On Rb20

Psymon

By Psymon,
in Engines & Forced Induction

 Share

Recommended Posts

Psymon Mentor

Psymon

Posted
Posted

Just finished wiring up the ballast resistor into my loom for GTR injectors. Came time to plug in the injectors and noticed the plugs on my loom dont suit the injectors.

On the injector there was a little tab on the outside of the case which had to be removed which i think CEFFIE mentioned in Roys tutorial, but i also have a little tab on the inside of the plug on the injector (sorta on the bottom between the two spade terminals) which is getting in the way. This seems like it will be a bit harder to remove without damaging things.

So i'm wondering if anyone has come across this before. Is there an easy way to cut off all the plastic thats in the way and once thats done will the plugs sit fine without the risk of them coming loose? Or is it going to be easier for me to try and find the right plugs to suit the injecotors and solder them on to my loom?

Cheers

Simon

Link to comment
https://www.sau.com.au/forums/topic/186215-gtr-injectors-on-rb20/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • MBS206
      Hi everyone.

      By MBS206 · Posted

      I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • soviet_merlin
      Hi everyone.

      By soviet_merlin · Posted

      All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • CoastG37
      Steering lock/control unit Infiniti G37

      By CoastG37 · Posted

      My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...