Jump to content
SAU Community

Crunch

charlie25T
 Share

Recommended Posts

charlie25T Proficient

charlie25T

Posted
Posted

Hey people

CAR: Nissan Skyline R33 GTS25T

MODS: Fmic, Bov, EBC, Air filter

After i installed my fmic it is now crunching in 5th. I has never cruched it 5th not really at high revs but aroung the 100km mark....................do you think is clutch problem, or do i need a fuel pump, or what .....

ideas need

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/
Share on other sites
Yawn Mentor

Yawn

Posted
Posted

I doubt the FMIC install affected your crunching in 5th. Probably just a coincidence, does it do it every single time you shift into 5th? Try double clutching and see if it helps.

Also, what does a fuel pump have to do with your gears crunching? :mellow:

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3367858
Share on other sites
charlie25T Proficient

charlie25T

Posted
  • Author
Posted
I doubt the FMIC install affected your crunching in 5th. Probably just a coincidence, does it do it every single time you shift into 5th? Try double clutching and see if it helps.

Also, what does a fuel pump have to do with your gears crunching? :mellow:

I dunno about that the fuel pump has to do........just a thought

double clutch it ............... i know how to double clutch

but what double clutch in 5th

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3367880
Share on other sites
charlie25T Proficient

charlie25T

Posted
  • Author
Posted
how can your car idle at 6000rpm? do you mean 600rpm? coz 600 is normal.

NA NA NA NA SORRY BOYS

I MEANT 600

my idle needs to be a 750

reckon my idle need to be up

i was also told it might also be a spark plug problem

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3369895
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

You car idling at 600rpm has nothing to do with gears crunching in 5th dude.

It also (the crunching) has nothing to do with a FMIC.

5th crunching is the synchro's letting go or the clutch being a bit so-so possibly in some way.

Totally unrelated to the points you've raised here

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3370035
Share on other sites
charlie25T Proficient

charlie25T

Posted
  • Author
Posted
You car idling at 600rpm has nothing to do with gears crunching in 5th dude.

It also (the crunching) has nothing to do with a FMIC.

5th crunching is the synchro's letting go or the clutch being a bit so-so possibly in some way.

Totally unrelated to the points you've raised here

thank for that.................. Well i have Xtreme heavy duty cutch ....and my pedal is a bit high

this is wierd cause it only happen when it is above 100km not under

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3370161
Share on other sites
made_guy Experienced

made_guy

Posted
Posted (edited)

just wear on you synchro's man. try double clutching as mentioned. i don't know enough to explain it, but it feels like releasing the clutch and then pushing it in again gives things a chance to align more nicely than doing the whole change in one motion.

e.g.

clutch > de-select 4th > neutral (clutch position same as when de-selecting 4th) > select 5th > release clutch [things haven't had a chance to re-align from a neutral point]

v

clutch > de-select 4th > release clutch > true neutral > clutch (fresh clutch engagement :P ) > select 5th > release clutch

[things have hit neutral without the clutch affecting it - the best starting point to select any gear. it's just a more box-friendly and often a more solid engagement]

remember 5th is also possibly the least 'sure holding' gear in your gearset and in worn boxes can just slip out of gear. think of it as if you're rock climbing and 5th is the last hand hold and you have to stretch and grab it with just the tips of your fingers... errm.. [note to self, shut the f*ck up with all these weird analogies you come up with!?!?]

Edited by made_guy
Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3373582
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...