Jump to content
SAU Community

Recommended Posts

Went out with a mate today to watch his brother competing in the World Remote Control Car Championships on Leitchs Rd Brendale. http://www.5thscaleworlds.com/. I think they are still qualifying and are heading for finals on Saturday.

They are awesome cars. 1/5th scale running a 23cc petrol 2 stroke engine. These things rev to 22,000RPM and run on a purpose built tarmac track.

The cars have full suspension (I mean everything, camber adj, caster adj, toe adjust, ride height adj, rebound adj, damper adj, etc) alone with carbon fibre disc brakes - cutest little brake pads you have ever seen.

The cars weigh about 10kg, are about 50cm long, hit around 90-100kph and cost about $4-5000 each.

If you get any time - go have a look.

Very cool :P

Link to comment
https://www.sau.com.au/forums/topic/186683-rc-world-championships/
Share on other sites

they are annoyingly loud things. I work just around the corner on pinacle street and we can hear them from the factory. Plus all the extra traffic blocks up the streets around the area plus kids all over the place. Its abit dangerous for an industrial estate with trucks and whatnot around all the time.

They are good fun to watch. They seem out of place being so small and intricate though.

You are right - need a lot longer track. Would imaging they would get up to a fairly hefty top speed on a longer track.

And you are right about the noise. Someone was tuning their engine while we were there and revving it at full tit for about 30 seconds.

Like a brushcutter on roids.

We've got a few :):D

But don't stand a chance with any of the World Competitors.

A 1/5th Lauterbacher X-Cross which is full alloy.

and a RS-5 that is Full Carbon.

Both with 23cc Zenoahs.

But we've got the special one with full alloy and a chrome 29cc Engine.

All with hydraulic disk brake systems.

I was there on the weekend, the track does seem to small. They to go as fast as they could there.

hahha yer my neighbour was an offical at this event, the 1/5th scale rc's are sweet, but my bank balance doesn't allow for that, its 1/10th for me until i start hitting the better money

hey.. 1/5th or the 1/10's?

1/5ths can vary... but the ones that they are racing are 4000+ thats the car online. + high tech servos, transmitter + receiver... etc...

big sum!

thats why most of the championship racers are all sponsored. no private racers or many.

i have an offroad 1/8th scale rex-x its a beast on that bmx track behind the race track at brendale :happy:

Pics??? I wanta see how bi these things are...

Dont they put poles, chains and stuff all of the track to stop people using it...

dan whats the prices of these comp cars..??

like all up with gear supplies for a season yada yada

1/10th to get up and running depends, normally near the end of a year or when a new chassis comes out you can pick up and older car that is setup fairly cheap. But to get setup with all the radio gear, spare parts, spare engines you could be looking $3000 with new parts.

Its fairly cheap buying stuff from overseas, RC-Mushroom normally have some good prices.

I know they use to put chains across the track, not sure now, they got taller fences. You can always go next door to Trackside RC and pay a small fee and they will let you drive on the track.

this is her, never let me down. i let my dad have a go and he went out of range at full throttle so it hammered up the park the smacked into a wooden pole, only broke the front bash guard, 10 bux from mr toys, mine requires the occasional tune which is easy as! and i clean it and put it in the shed ready for next time.

there great fun however wen misstreated can be expensive, the value of my car is around 700 i think brand new and is a strong beast, i have also put pvc pipe around the tyres and she slides like a champ can control it through anything...

post-36811-1191924446_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...