Jump to content
SAU Community

Recommended Posts

- HID 8000K D2C replacement bulbs (2). Brand new never used. = $60.00 the pair

- R34 GTT seat covers. Original Black and light grey. From 4 door GTT. Make a reasonable offer

- Blitz BlowOff Valve. Comes with adaptor and about 30cms of pipe so easy to fit. Good condition. = $125.00

- Alpine 3da w/882 Double Din Player. Multidisc cd/Cassette/Radio. w/remote, Sub control &RCA outputs. = Make a reasonable offer

- Brand new RALLIART seat belt pads. black in colour = $5.00 a pair (3 pairs available)

- 2 x 14inch rims with jap snow tyres. Good for drift as they dont grip the tarmat well. Suits 4/114 stud pattern = $10.00 for both

- VT Spac Springs (FE2). Complete set. Good condition. fronts and rears = $30.00 the set

- TV antennas (for cars). Never used. Increases receptions. double antennas = $10.00 each

- VZ Guard flutes and indicators (complete).Never used. Can be retro fitted to any car.= $170.00 the pair

- 180SX Vertex rear bumper. New. Fibreglass.= $150.00

- R34 Skyline GTT rear boot spoiler. Grey in colour. Can be custom fitted to other vehicles. Low 'T' wing design = $150.00

- R33 Stock 16inch wheels. Comes with near new tyres. Rims in excellent condition. = $400.00 the set

- Supra Stock 16inch wheels. Tyres are good. Rims in excellent condition. = $300.00 the set

- R34 Bilstein stocks and springs with spring helpers. No leaks. firm ride. Good ride height. Make a reasonable offer

- R34 lower skirting diffuses for rear = Make a reasonable offer

- R34 stock sidemount cooler = $150.00

- R34 stock intercooler piping = SOLD

- R34\180SX front bar indicators = Make a reasonable offer

- R34\S15 side guard indicators = Make a reasonable offer

- R34 GTT front pipe and dump = Make a reasonable offer

- Apexi Air Flow controller = $125.00 (SOLD Pending Payment)

- R34 Stock airbox with snokel = $140.00ono

- 2 x 275x30x19 Bridgestone tyres (min 50% left) = $300.00 the pair

- 2 x 235x35x19 Wanli tyres (min 95% left) = $300.00 the pair

_____________________________________________________________________________

***Open to reasonable offers and trades/swap***

Needed the following:

- pair of Semi or full Slicks (15inch and larger. Used)

- Custom plates

- 17 or 18inch wheels to suit 5/114 pattern

- Super Low springs to suit (EA-EL)

pics of parts\items can be found here as I upload them...thanks:

http://s166.photobucket.com/albums/u92/YBHVE4/Parts2Go/

Edited by DEJA VU
Link to comment
https://www.sau.com.au/forums/topic/186995-parts4sale-last-updated-1302/
Share on other sites

hey champ i have a full set of new full slicks here (circuit racing ones) n some custom vic plates (wat u after?)

Well my list of things I have available for swap\trade are above. PM me if there is anything you are interested in. thanks

the heck? why is the apexi air flow controller so cheap??

is that apexi super air flow convertor ur talking about isn't it?

This is the older model. not the blue screen one. works well with no problems.

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...