Jump to content
SAU Community

New Girl To Skylines...

michy

By michy,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

funkymonkey Grand Master

funkymonkey

Posted
Posted
I'm not sure how your rating is compared to here in canada.. but I use 87 octane in my Daily driver non turbo GTS and 94 in my GTS-4..

we only have 87, 89, 91, and 94 at the pumps here.. 100 octane in japan = about 95 here in canada.. so 94 is the best we can do..

but the N/A doesn't need the higher octane gas.

You guys follow the US octane rating system, we follow the British octane rating system, and the japanese have their own.

so our 98 octane = your 94 = japanese 100.

Oh hectic you're Canadian :D I didn't think anyone outside Oz or NZ would be interested in SAU! This is like, a moment for me...Skylines have brought us all together lol. You guys have right-hand drive? Or you drive like Americans? :)

Aaahhh sounds like Canada has pretty crappy petrol/gas. I thought we had it bad compared to Japan, but you have only 94-5 octane? Does the car (albeit an N/A) run ok?

They've still got the 15 year rule, so they get all the old stuff... atm as far as skylines are concerned they only get R32's... its wierd... canada's like the land of R32's now.
There's quite a few visitors from the UK and US too. He would have a right hand drive car, skylines were only made for the Japs as far as I know.
technically no, japan, australia and the british (conveniently all RHD countries)... those were the only countries to sell them new. Well NZ as well, but they don't have a local automotive industry, so they don't count. But yeah, it is RHD... which is kinda JDM tyte yo over there because they get all the US LHD cars.
steven22 Collaborator

steven22

Posted
Posted

Yeah use the BP ultimate, cleaner and better for your skyline, if you dont you'll notice it just doesnt rev right. Definetely get it detailed but watch your spear wheel and jack, detailers sometimes leave them out of the car when they are finished.

Get it serviced as was said above. But before you go on a long trip, just check oil level and have a peek at the coolant reservior and check the level of the coolant, it will most likely be filled with a green liquid. (sorry if you knew all this).

Other than that, have fun

You got any pics of the car?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      Why are people so insistent on making dirty water?!
    • Dose Pipe Sutututu
      Duncan's V37.......race car?

      By Dose Pipe Sutututu · Posted

      Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...