Jump to content
SAU Community

What Would You Choose  

28 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Hey there guys, im new to the whole skyline thing and about to purchase one... problem is, what one?

Im either going to go a R32 Gtst or a R33 Series 2 Gtst

Would would people suggest?

I know i can buy a R32 cheaper and spend the money on it... or just buy a newer car with some mild mods

or pro's and cons of either one...

Any help would be most appreciated, Thanks guys

-Griffo-

Edited by Griffo04
Link to comment
https://www.sau.com.au/forums/topic/187676-new-guy/
Share on other sites

im sure this topic will be pretty biased.. but here goes:

i would choose the 33 s2 simply because its newer, more powerful, bigger turbo, may have less km's, mild mods will see it with some pretty good numbers...ect ect..

realistically, you need to choose what you like, some people absolutly hate the look of 33's, while others hate 32s. regardless of that, the way i look at it, the newer more modernised updated version is ussually the winner.

of course people will argue against it, so the best influence and decision is your own.

also list some specs about both cars. i.e what year, current mods, future mods, kms, ect.. that will then make better opinions than just whats better a 32 or 33.

good luck and welcome! :bunny:

Link to comment
https://www.sau.com.au/forums/topic/187676-new-guy/#findComment-3386591
Share on other sites

i got a series 2 r33. IMO - it looks bloody nice (specially the back), more power, more space inside, nicer interior etc. And as mentioned - minor mods can make a huge power difference to the stock version. However, the car is big (compared to the r32) - both bulky and its as long as a family sedan.

R32, is old - so there might be more problems than the r33 - but this comes down to how the previous owner used it. If it straight from japan, you probably would never know how the previous owner used it (i.e if ur buying one off a SAU member, u will have an idea as to what the car has been through).

Both are great cars on the road and track....pretty much, either one u go for, u cant lose - unless u buy a lemon.

Link to comment
https://www.sau.com.au/forums/topic/187676-new-guy/#findComment-3387204
Share on other sites

both are old, heck even R34's are getting long in the tooth,

Depends how the particular car you're looking at is kept

Personally I'd go the Series II R33, with the front lip they can look quite mean

Good luck with your purchase

Link to comment
https://www.sau.com.au/forums/topic/187676-new-guy/#findComment-3388151
Share on other sites

Thanks for the advice guys, looks like the 33 S2 is the members choice, but still i guess it does come down to my own decision, i do love the style and look of a 32 but the 33 being newer and a better chance of having less problems is prolly going to be my choice.

All i have to do is find a decent one in brisbane that isnt over priced....

Link to comment
https://www.sau.com.au/forums/topic/187676-new-guy/#findComment-3388597
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...