Jump to content
SAU Community

What Ecu To Use

R TUNE

By R TUNE,
in General Automotive Discussion

 Share

Recommended Posts

R TUNE Mentor

R TUNE

Posted
Posted

hey guys im after some info on what ecu to get for the 31.

ill have the following.

2.25" exhaust

exstractors

k&n pod

custom crow cam

adj cam gear

440cc injectors (gtr)

GTR fuel pump.

im getting a price on a links plus and a mate of mine is getting a autotronic (i think or its the one that sounds like motec)

yea any advice would be good i dont mind what type of ecu as long as it dont cost me the earth.

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/
Share on other sites
kjb_r33 Experienced

kjb_r33

Posted
Posted
hey guys im after some info on what ecu to get for the 31.

ill have the following.

2.25" exhaust

exstractors

k&n pod

custom crow cam

adj cam gear

440cc injectors (gtr)

GTR fuel pump.

im getting a price on a links plus and a mate of mine is getting a autotronic (i think or its the one that sounds like motec)

yea any advice would be good i dont mind what type of ecu as long as it dont cost me the earth.

http://home.aanet.com.au/nistune/

Just got one myself, for my 32

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3393886
Share on other sites
R TUNE Mentor

R TUNE

Posted
  • Author
Posted
http://home.aanet.com.au/nistune/

Just got one myself, for my 32

hey mate thanks for that, thats first company iv'e seen make a reprogramable ecu for the rb30. and for only $400.

can you tell how youve found the ecu so far, and who would be able to tune it, and how easy it is to use compared to other ecus'

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3394494
Share on other sites
kjb_r33 Experienced

kjb_r33

Posted
Posted
hey mate thanks for that, thats first company iv'e seen make a reprogramable ecu for the rb30. and for only $400.

can you tell how youve found the ecu so far, and who would be able to tune it, and how easy it is to use compared to other ecus'

I have had experience with a motec M48, on my previous r33. Obviously with the Nistune system there is no setting up, i think its a breeze to use, and also great value for money. I already had the eprom socket in my ECU so i only had to solder 4 wires to the board, plug the daughter board into the socket and away it goes. I sent matt the bin file from my ECU, he installed it onto the board before sending it to me and car started straight up with same settings it has had since i bought the chip off Ceffie.

I just installed a z32, took 2 mins to reprogram for the bigger AFM, also have a set of GTR injecters coming and they are just as easy.

Download the user manual from his site, pretty well explains the uses of it.

Ken

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3394585
Share on other sites
R TUNE Mentor

R TUNE

Posted
  • Author
Posted

so all i should have to do is wire up the few wires required as i have a stage 2 chip all ready soldered in (soket type)

look's like i might give it a try then defently should be easy to use from what your saying. so if i had it then was to add a custom cam xf throtal body GTR injectors and gtr fuel pump i could do all the tuneing my self. sounds good esperly for $400

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3394912
Share on other sites
R TUNE Mentor

R TUNE

Posted
  • Author
Posted
www.adaptronic.com.au is what I used to run on my R33.

Only reason I don't now: I'm selling the car, keeping the ECU to use on the next car.

hey mate had a look however the system is not suited to the R31 so thats out.

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3394954
Share on other sites
kjb_r33 Experienced

kjb_r33

Posted
Posted (edited)
so all i should have to do is wire up the few wires required as i have a stage 2 chip all ready soldered in (soket type)

look's like i might give it a try then defently should be easy to use from what your saying. so if i had it then was to add a custom cam xf throtal body GTR injectors and gtr fuel pump i could do all the tuneing my self. sounds good esperly for $400

yep

Edited by kjb_r33
Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3395888
Share on other sites
R TUNE Mentor

R TUNE

Posted
  • Author
Posted
Why is it not suited to the R31?

They run the same motor as the VL yes?

And I know the Adaptronic is on a VL RB30

according to thier web site they are nnly makeing them for the rb25 eng + some i may be wrong but thats what i read

Link to comment
https://www.sau.com.au/forums/topic/188107-what-ecu-to-use/#findComment-3397684
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...