Jump to content
SAU Community

Recommended Posts

that was a pain in the arse today..i so wanted to hear that thing....just wack some rb25 coils in mate, she'll run sick! LOL

Fresh set of plugs later on today, and she should be ok. Might chuck some fresh fuel in it too.

If she doesnt start, Ill empty the rest of the jerry can on it and take to it with a zippo.....

cheers man, figured if i have to get out anyway, may aswell go somewhere i havent been before :blink:

should know for sure if i have it in no more than 12 weeks, and on a plane in no more than 13 weeks. (going through an agency)

Fresh set of plugs later on today, and she should be ok. Might chuck some fresh fuel in it too.

If she doesnt start, Ill empty the rest of the jerry can on it and take to it with a zippo.....

lol, nah she'll be alright.

scandyflick, thats a big step, to pick up everything and take off to canada! Would be a great opportunity...what agency you going through?

scandyflick, thats a big step, to pick up everything and take off to canada! Would be a great opportunity...what agency you going through?

i was gonna be dropping everything and moving somewhere anyway, was originally going to be perth, but a friend of mine whos done 3 or 4 working holidays put me onto the canada idea, and it sounds a lot more fun, start over with a clean slate, see a country ive wanted to see for years, should be good.

going through a mob called one world recruitment, they do all the leg work for me, charge a 600 smacker fee, but they practically guarantee a placement in a reasonable timeframe, or they give me a refund.

why you need one champ?

Rebuilding the engine with all forged items, Iv just got a oem nissan water pump for $110 from ebay usa and just wana check what the going price is for the oil pump. I was going to go jun for just over 1k but dont really wana get a custom sump to go with it.

we'll as i told the person that gave me this i will put it up for them but i don't get or agree with tatoo's but hey each to there own

i got given this yesterday buy Ric's Auto Perfection's hairdresser

post-13315-1206750698_thumb.jpg

I got my tat done there, they done a great job on mine, so if anyone is think bout gettin something done i highly recomend them...

Rebuilding the engine with all forged items, Iv just got a oem nissan water pump for $110 from ebay usa and just wana check what the going price is for the oil pump. I was going to go jun for just over 1k but dont really wana get a custom sump to go with it.

If you go anything bigger than a std rb25 pump be sure to restrict oil pushing in to the head.

If you run a JUN pump you will definitely have to look at both restricting oil to the head + providing a rear oil drain from the head to the sump. All of which is a huge stuff around.

A new stock pump is fine. If you feel the need make the step to an N1 pump but do bare in mind even Nissan restricted oil to the head with their N1 motors.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...