Jump to content
SAU Community

Recommended Posts

yeah, yeah, yeah....tell everyone the truth!!!

Its that big juicy kiss you gave me at the airport :worship:

haha yeah......... ;) :laughing-smiley-014:

Any1 put in an oil catch can before?

what did you guys use to block the holes?

i read to use some threaded plugs?

any1? cheers

We have used "Door Stops" (thats what they look like) with hose clamps around them..you can get them at supercheap, clark rubber pretty sure :P

yeah pretty much might have to re-pin one of the sensors plugs but there a little cheaper for R33 gtr than R32 gtr :D

cool cheers man

JDM Yo! at least if the police cant read it tell them your car is the biggest tyre size

Morning Maz ;)

I am starting to feel better :w00t:

i didnt block any of the holes, i just ran the catch can in between the passenger side rocker cover and afm pipe

yeh i was reading up on the 5 million plumbing set ups for the catch can and sydneykid recons on the GTR its best to run the 2 hoses from the top to pipes on top of the rockets covers. best breathing setup apparently. but yeh your way would make things easier :P

Sinful - yeh im hoping 1 size fits all lol. ill have to try and measure the holes i need to plug ;)

^^ non sexual :S

i just bought a 040 bosch pump to put in my GTR!!! yay then just found out its not much of an upgrade :worship: i couldnt get the search engine on SAU to work so i was flying blind if you will.

yeh i was reading up on the 5 million plumbing set ups for the catch can and sydneykid recons on the GTR its best to run the 2 hoses from the top to pipes on top of the rockets covers. best breathing setup apparently. but yeh your way would make things easier ;)

Sinful - yeh im hoping 1 size fits all lol. ill have to try and measure the holes i need to plug ;)

^^ non sexual :S

i just bought a 040 bosch pump to put in my GTR!!! yay then just found out its not much of an upgrade :worship: i couldnt get the search engine on SAU to work so i was flying blind if you will.

The search button is working now...It's an alright upgrade (I havent upgrdaed mine yet) are you getting injectors to go with it? What power output are you going for? Do you know what teh GTR puts out now??

Mine with nothing done to it made 206kws at the rears at dyno day last year :P

link catch can

Another link

thanks jess :P

im pretty sure on its tune (about 10-11psi boost) ben said he rekons close to 210 maybe more, bens mechanic said it picks up faster than stock GTRs :worship:

nah i dont have new injectors yet, i was going to get 600cc and a fuel rail all in the 1 hit? thoughts?

i want about 250-270kw eventually, i wanna see how much i can get with out swapping out the turbos but want to eventually, maybe after my GTS-t sells.

what are my options jess?

thanks jess ;)

im pretty sure on its tune (about 10-11psi boost) ben said he rekons close to 210 maybe more, bens mechanic said it picks up faster than stock GTRs :P

nah i dont have new injectors yet, i was going to get 600cc and a fuel rail all in the 1 hit? thoughts?

i want about 250-270kw eventually, i wanna see how much i can get with out swapping out the turbos but want to eventually, maybe after my GTS-t sells.

what are my options jess?

yeah 210 sounds about right ;) Have you got an aftermarket ecu?

Fuel rail up to you , dont really need it :worship: Injectors yep 600cc would be fine..You wouldnt really need injectors until later either cause Jay and I are both running standard injectors still in our GTR's and getting the same power...

I have 300kws and didnt take me many mods to get there and that sort of power is lots of fun! The power FC was the main component that helped me get there!

Hmm do you know what turbos you have now? Mine are standard but pretty sure are steel wheeled so handling 1bar well

the ecu has got a mines sticker on the ECU so im pretty sure itll have a different fuel map, and yeh its not running stock boost about 10-11 is my guess :P

Oh that's right you told me at villies :worship: sorry!

My 2 cents: I would be worried about the ceramic turbos letting go (if they are ceramic)...So I would go turbo's first and then getting injectors, cams and stuff later and can up the boost and get more power out of it..

I only say that cause I have standard steel wheel turbos and have put the boost up to 1bar and getting 300 out of it with stock internals and minor mods like cam gears, catch can set up..I also love responsive turbos so have kept them on ans waiting for them to fail so can do next upgrage which will be going up to 350kws going garret turbos 2860 -5, injectors, bigger fuel pump (walbro) and drop in PonCams.

I dare say that the stock rb26 turbos can handle 10-11 psi, but its always better to be safe than to be sorry i guess.

Chad is still waiting for the turbos Steve!

Damo,

What turbos are you talking about?

Yeah the stock turbos can handle it but I just dont trust ceramic :worship: plus never know how long they have been on there for and what sort of life they have had??

can someone maybe point me in the right direction for info on the gtr turbo's??? ive got a set of 33 gtr ones in the shed and was lookin at having some work done to them and chuck em on with a list of other mods, or would i be better buying some HKS numbers???

**edit: ive come from the world of carbies so go easy lol

Edited by rhys5169

So turbos first hey? how bad are the stock GTR turbos? in the way of letting go? how can i get the steel wheel 1's? is there a way to do a conversion?

what about dumps and front? do that when i get new turbos?

*edit*

bens mechanical pulled the turbos off not too many kms ago to have a look and they are in good nick ;)

Edited by joeleo87
can someone maybe point me in the right direction for info on the gtr turbo's??? ive got a set of 33 gtr ones in the shed and was lookin at having some work done to them and chuck em on with a list of other mods, or would i be better buying some HKS numbers???

**edit: ive come from the world of carbies so go easy lol

Turbo Spec sheet

Google the part numbers on the turbo should be able to find out what they are..Or look on my spec sheet in the link...

To revamp them cost just as much to buy new...If in ok condition like no shaft play or noisey when spinning the inlet wheel chuck them up for sale and see what happens..But most are in the market for steel wheel turbos these days as the safer way to go ;)

Turbo Spec sheet

Google the part numbers on the turbo should be able to find out what they are..Or look on my spec sheet in the link...

To revamp them cost just as much to buy new...If in ok condition like no shaft play or noisey when spinning the inlet wheel chuck them up for sale and see what happens..But most are in the market for steel wheel turbos these days as the safer way to go ;)

i was told the 33 gtr turbo's had steel wheels??? (they came free with my car anyways).......

i just dont trust the ceramic so always looking for a way to avoid leaving them on there

So turbos first hey? how bad are the stock GTR turbos? in the way of letting go? how can i get the steel wheel 1's? is there a way to do a conversion?

what about dumps and front? do that when i get new turbos?

There not bad just limited to what you can do with them..Steel wheel are everywhere only stock R32, R33 and R34 had cermaic turbos all the rest on teh market are steel wheel now :) Its expensive to get them steel wheeled! But it is an option you can do!

Oh yep definately reccomend aftermarket dumps and front pipes...But dumps are a pain in teh arse to do so best to do it when you going to do turbo as well LOL..Not winning are we ! ;)

i was told the 33 gtr turbo's had steel wheels??? (they came free with my car anyways).......

i just dont trust the ceramic so always looking for a way to avoid leaving them on there

Check the numbers on the turbo..but could be N1 spec or have been steel wheel in standard housing in japan like mine ;)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...