Jump to content
SAU Community

Recommended Posts

20 in your 31 ftw!

hey steady eddy, you say hello to leanne for me?

if kylie stil works there, ask if she wants a repeat of what we did on the counter lol

Yeah, she and some of the other staff remember you...apparently you talked about your 33 a lot :D

Kylie left before I started there but she came back the other week so I'll ask her when we're on the same shift next.

probably Steve.

Ok, so i have bought a Power FC, no hand controller. Should i get a HC before i worry about installation and tune?

Just got my HID kit, which looks (to me) like the connection from my globes to my HID kit dont match. Anyone wanna fit it for me, or know of someone who will do it? Im thinking Auto Perfection.

Cheers guys.

is it the whole kit globes and igniters, becuase HID globes are different to halogen globes :D

Steve, won't they take it back?

they may i need to clean the gasket goo off it and make it look unused

hurry up nice weather. Im keen for a victor/murry bridge cruise again.

+1

hey guys, I've been away from my computer for about 4 hrs and just got back to see the mods have removed the thread about "Photos" from that dude with the bi-polar disorder.

Did he end up flaming me for saying that manic depressants shouldn't be off their medication?

I don't know if I should've been laughing or feeling sorry for the poor buggar.

yeah you werent to know Pete Chris is a nice guy little eccentric

so craig, in a nutshell, what what else was said after my post to that dude?

I was hoping to found out what his deal was beofre the thread was actually deleted.........he obviously came across as a hacker with a few personal issues!

yeah dont flame just based on one meeting

I see the "SA Photo" thread is gone too.

Chris is an ok bloke, but has had some issues in the past - guess you could say he is a rather misunderstood kind of guy. Its not my place to talk about his past, but just remember he is a nice bloke who's had some issues. I'm sure everyone on here has had their good/bad days, and today probably wasn't one of his better with regards to agreeing with forum rules.

+1

limewire + broad-band FTW! 234 songs since sat night lol

how many kegobytes is that craig

My car has been mis-firing inconsistently for the last week

As in some days it will run beautiful for an hour then mis fire for a while then clear itself up and run fine again!

I ran a couple bottles of injector cleaner through it, didnt really seem to make much difference at all.

Any suggestions?

Really wanna fix this tomoro arvo if possible, really starting to shit me to tears, stalled it just before the intersection as it 'randomly' started to mis fire again today

yeah i too would say AFM maybe dry solders or cracked coilpacks

oh and my new dump pipes

post-13315-1219756431_thumb.jpg

i got my dump pipe from andrew too..awsome job but my dump pipe had a circle thing that sat in the exhaust housing instead of the eyebrow thing that seperates the wastegate

but yes awsome quality there

yeah Pete i asked if you rang we had a laugh together because he wasn't sure who you were talking about because i had only met him once

cant wait to see how they go with new tune on friday want to do a before power run and after power run with only changing the dumps

if you think you wash your car to much some would say not enough

>>See Here<<

EDIT

Vu you would get so sick of a screamer

Just got back from a 5 day trip to Melbourne.

Hired a VE SV6 Commodore with 23k on the clock.

At first I began thinking about 6ltr + turbo + 275 sticky tyres and its traction control working nicely.

THEN..........

Soon discovered it already has a whoopwhoop wheel bearing thats on its way.

A nasty arsed harmonic that occurs on some road surfaces that drives you absolutely insane at ~110km/h.

The centre dash grill looking thing is already peeling up.

A rattle in the drivers door

A rattle in the dash over reasonable bumps

Doors close like and thud like a cheaply made Korean car.

Feels as if the spring rate needs to be a tad tighter for the weight of the car and rebound tightened up as it has way too much body roll and seems to launch in to the air over wavey dips in the road at high speed. Definitely not 'sports' suspension like the older VS/VT's had.

Brakes feel soft and not confidence inspiring through the hills.

Its fairly sluggy overtaking from 90-100km/h and really hits a brick wall at 140-150km/h. Feels like it really starts to push the wind.

Fuel economy on the open road is 8.5L/100km's.

City is around 12.5l/100km's driving it really soft.

Looks as if build quality has not improved since my last Commodore (VS 5ltr 5speed) that I bought with low km's when it was only just 2years old.

Definitely wouldn't sink 40k in to one which is what the SV6 is worth. Quite disappointed as I really began to think about a nice big cubed v8 with a turbo hanging off it. :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...