Jump to content
SAU Community

Recommended Posts

LMFAO haha ur a funny kent carl lol

Hows ur 32 goin?? havnt seen ya since that meet down at the kmart carpark on anzacs earlier on in the year.

cars goin ok, have been keeping her nice n healthy, replacing fluids more often than i need to and tryin to keep a black car clean :)

gonna spend a bit o coin on beefing up my cooling system b4 summer.

we should have a welcome home party for ur car :)

LMFAO haha ur a funny kent carl lol

Hows ur 32 goin?? havnt seen ya since that meet down at the kmart carpark on anzacs earlier on in the year.

that the meet i think it was carl? :)

i was suprised that they didnt really show us the track before they started chucking car on there.

i guess im just real picky and dont like change :) original top gear ftw!!! :)

was good seeing you again at the dinner btw steve, hadnt seen you in ages haha

yeah Kye i like the original better too and hope they put that on saturday nights or something i don't see why they couldn't of found a big enough airport and just copied the top gear track it seams they copied the set and everything else maybe that's why we didn't see much of the track because they couldn't reproduce it properly

yeah good to catch up at the dinner

not happy that 18x10 rims cant come via sea.... :@

says who :)

cars goin ok, have been keeping her nice n healthy, replacing fluids more often than i need to and tryin to keep a black car clean :)

gonna spend a bit o coin on beefing up my cooling system b4 summer.

we should have a welcome home party for ur car :)

nice dude

Once i get mine back think im gonna change my cooler and piping as the one i have on now is quite dodgy i think so want a good cooler for when summer hits.

haha yes a welcome home party sounds good lol dunno when it will be tho ...hopefully soon :)

oil cooler is a definite for me, especially for long drives and might go for a better radiator too... but $ will decide that

alluminium radiator??? (spelling)

i been looking at a few but dunno whats good and whats not lol

nice dude

Once i get mine back think im gonna change my cooler and piping as the one i have on now is quite dodgy i think so want a good cooler for when summer hits.

haha yes a welcome home party sounds good lol dunno when it will be tho ...hopefully soon :)

oil cooler is a definite for me, especially for long drives and might go for a better radiator too... but $ will decide that

oh pete, i owe you a drink too. The drinks i had at mine werent for my bday, was just a random event lol. mY bday isnt till later in the year. Cheers though and my round next time :)

Haha, no worries Luke, I still would've bought you a beer anyway.

my cars been off the road for nearly what 3 months now? something like that anyways there starting to paint it this week just gotta find a front bar..probs gonna go aftermarket coz cant find the aero bar for the 32. Anywho what i'm asking is should i change the oil n oil filter n maybe coolant as its been just sitting there for the 3 months its been off the road??

Oh and also where abouts is Aussie dyno as im probs gonna take my car there from now on as everyone seems to be saying good things about em and im sick of fishers.

Lol Vinnie, weren't you the guy that told me how good they were a couple of months ago......what's happened now to make you see the light?

aussie discount mufflers and dyno is corner of pt road and south road next to dazzlers!!!

ill be there next week to get tune and some bits made up :) awsome guys and treat ur car well!!

tell em ryan sent u!

Haha, no worries Luke, I still would've bought you a beer anyway.

Lol Vinnie, weren't you the guy that told me how good they were a couple of months ago......what's happened now to make you see the light?

haha lol i was waiting for this lol yer well at first was alright with em but after they forget to put ya heatshield on ya turbo n now cant find it and then forget to put on the plastic underlay on which ended up causing some plastic thing to rip off and charge me a fortune i started to get a tad piissed off lol

so gonna take it to either aussie dyno or maybe more power..any one know the locations for both of these??

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...