Jump to content
SAU Community

Recommended Posts

I'm glad my spending money on mods is drawing to a close I think. It slides reasonably well for what it is now, works better than the sum of it's parts you might say. I reckon a clutch and maybe some sway bars is all I want mod wise now. The rest is just tyres, fuel and oil changes (and fixing shit if/when I stack it again :thumbsup:)

you have good taste, but i personally think the F4 is getting a bit long in the tooth. It certainly is a beautiful bike and one of the best Tamburini has designed but the rear needs some work, it's a tad to fat for my liking, and the headlight area needs attention. Hopefully with some cash from harley davidson they can launch the next all new model.

Also i personally find it hard to justify the extra cost for the MV over say my bike. Yes i know mine isn't as coverted or "unique" but for the money nothin beats a japanese inline 4 sports bike!

Its all opinions and tastes tho. I like the styling of the rear end of the F4 except the 4 pipes. They just look too ... "matchbox car" ... if you know what I mean. I definitely like the headlight styling. but ultimately, I bought myself the F4 Brutale, because there was no fairing to hide all that fine work into the build.

I think, for the base models, the prices are fair. Remember, you're buying an Italian bike with a Ferrari engine. A new model GSXR is $18K and the F4 1000S is $26K.

but I agree that when you look at the model range upwards ... its about $31K for the 312, no idea on the 1078 but guessing about $36K (in line with the Duc 1098), and $70K for the Tamburini.

At the end of the day, the Brutale is there to satisfy my taste for Italian machinery. I have my Suzuki TLR1000 and I prefer that bike anyday over the Brutale. I've had it 7 years now, and will have it 7 years after the Brutale is gone. Each bike/manufacturer has different qualities to offer in a motorcycle. The brutale is the girl you flirt with at parties ... the TLR is the whore you take home and bang all summer long!

:thumbsup:

didnt get my baby back today..soo hopefully tomorrow otherwise gona lose my sh*t lol

and hopefully my boost gauge arrives in the post tomrrow too

so much hoping going on now hehe

BOYS AND GIRLS SELLING YOUR CAR BE CAREFUL WHEN LETTING A PROSPECTIVE BUYER TEST DRIVE YOUR CAR!

nav_m.gifRuffls S15 Stolen!Options menu_action_down.gifuser-online.png<A href="http://www.skylinesaustralia.com/forums/Ruffels-m17884.html">Ruffels ipsmenu.register( "post-member-4218791", '', 'popmenubutton-new', 'popmenubutton-new-out' ); to_post_off.gif Yesterday, 05:06 PM

Post

#1

av-17884.jpg

RUFFLS

pip.gifpip.gifpip.gifpip.gifpip.gif

38.gif

Posts: 1,212

Joined: 2nd March, 2005

From: Melbourne

Car(s): 01' s15 200SX

Real Name: Mark

Trader Rating : 9

spacer.gif

Please keep an eye out for an Aus Spec 2001 S15 200sx in Pewter with number plates 'ruffls'

it was forsale and was stolen right in front of me while on a test drive...

i was out of the car for 1 second at a petrol station on todd road (the onramp to westgate bridge)

and the guy test driving the car drove off!

any information please call me on 0408 569 685 or ring 000

car was stolen at 3:30 this afternoon

thanks

-Mark

--------------------

Well, I posted a thread in the cosmetic section, but I'll put something here too, one of you guys might be able to help me out :thumbsup:

I need to get rid of this:

image039av9.th.jpgthpix.gif

Any ideas on how to go about that?

cut and polish maybe ?

autosol ? (i know its a metal polish but its magical)

Its all opinions and tastes tho. I like the styling of the rear end of the F4 except the 4 pipes. They just look too ... "matchbox car" ... if you know what I mean. I definitely like the headlight styling. but ultimately, I bought myself the F4 Brutale, because there was no fairing to hide all that fine work into the build.

I think, for the base models, the prices are fair. Remember, you're buying an Italian bike with a Ferrari engine. A new model GSXR is $18K and the F4 1000S is $26K.

but I agree that when you look at the model range upwards ... its about $31K for the 312, no idea on the 1078 but guessing about $36K (in line with the Duc 1098), and $70K for the Tamburini.

At the end of the day, the Brutale is there to satisfy my taste for Italian machinery. I have my Suzuki TLR1000 and I prefer that bike anyday over the Brutale. I've had it 7 years now, and will have it 7 years after the Brutale is gone. Each bike/manufacturer has different qualities to offer in a motorcycle. The brutale is the girl you flirt with at parties ... the TLR is the whore you take home and bang all summer long!

:)

I agree with most of what your saying except for two things, i think the pipes look horn on the f4. And the "ferrari" engine does nothing for me. My bikes mill puts out more horsepower and torque across the board, so the advantages of "Ferrari" engineering seem wasted to me.

I agree with most of what your saying except for two things, i think the pipes look horn on the f4. And the "ferrari" engine does nothing for me. My bikes mill puts out more horsepower and torque across the board, so the advantages of "Ferrari" engineering seem wasted to me.

You haven't ridden one yet have you? ;)

The engine (including the tuning) is brilliant! There is no snatchiness of the throttle whatsoever. It doesn't have mountains of power or mountains of torque, but what it does have it delivers smoothly and where the power should be. No jap bike I've ridden yet is as smooth as the F4 engines are. Thats the Ferrari influence there. The gearbox is brilliant also. Snips into gear easily, even under hard acceleration and without clutching. I've found most jap boxes clunky. Clutch feel is precise and smooth and easy to measure when powering off hard. Don't be fooled by the race for big power in bikes ... look closely at the delivery of that power to the rear rubber. Big power means nothing, if it is a pig to ride and if it upsets the handling of the bike. Even the newer jap hyper machines still are not smooth to ride. The MV is so smooth that abusing it will not upset its stability.

Oh ... and no other bike has that 'flutter' note to the exhaust like the MV :) But in the end, she's the flirt, not the whore.

Edited by RubyRS4

just got my saber boost gauge in the mail :) but just wondering there is an air filter that goes between the pressure source and the boost sensor box..do i have to put it in coz wouldnt it be a restriction and show a lower boost reading with it in???

Nah it was a delammed tyre Steve, the strands of rubber were flailing around giving the guard/door a good hiding :)

I got some wash/polish onto it and it cleared 99% of the marks away, I was pretty surprised no cutting needed.

While I was there I washed the whole car and it looks fking amazing now, for a trashed drift pig ;)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...