Jump to content
SAU Community

Recommended Posts

I know the question was not directed at me BUT....

i would have a jxz100 manual if i could have afforded one at the time,

i drove one that had heavy duty clutch, teins, ebc, fmic and a zorst... it was AWESOME. felt a lot smaller than it actually is.

im sure u know toyota have a tendancy to over engineer things, so u can throw lots of bolt ons at a 1J and thrash it, and in return it will love u.

also i reckon they are dead sexy :sick:

edit:

check this >>>jzx90<<< that has a 1.5J for sale $15k !!!!!!!!

JZX90forsale.jpg

yeah i love JZX100's too been cruising in one and very nice indeed :laugh: > skippy

i have an eeepc 4G that i dont rly use...

i just installed ubuntu on it cos i was bored

thinking about using it in my car for something... nfi what lol

yeah my daughter wants one for christmas

Ubuntu is a popular version of the linux operating system.

eepc is a really small notebook that uses an sd card to store things rather than a typical hard disk/drive.

new ones come with a 10" screen and a 80gb hdd

the new ones (10 inch) have a laptop hdd.

the small ones like mine have a sshd like in an ipod, which means u can knock it about a fair bit and it wont harm it

oh btw, i just found out that the guy that was selling that jzx90 died a little while back :'( came off his motorbike

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...