Jump to content
SAU Community

Recommended Posts

Hi everyone im back :P im now living in my new house :huh: my laptop shat itself last week so i gave it to my mate to fix and only just got it back today, so what have i missed??

everything babe just go back about 300 pages and you will be ok

Rb30 keeps the 4wd and the low mounts (as low mounts are part of the head).

Everything bolts on as per normal. The sump adaptor bolts on to the bottom of the rb30 block and then on to the 4wd sump/diff.

-----

3k.. Sounds like an AFM issue. Make sure all the IC pipes are connected properly.

probably roughly 10k i assume for HKS version

Wanna keep the 4wd tho, and twin low mount's

Also Cubes brother has a R32gts-t got new coilpacks, plugs and serviced recently. anything over 3k the car starts chugging, any idea what it would be?

what cubes said! tell craig to get another afm. if he wants he can test mine out on his 32.

the cars gone into limp mode or whatever its called. happened to me and its a pain to drive!

hey ruby.... looking at getting a motor bike...

wats a good bike to look at? beginner also :thumbsup:

why you asking him.........you know what he's gonna say

"if it aint Italian, it aint worth havin", lol

Here's a bit of education for you:

2008 Fat Boy

FLSTFFatBoy2008.jpg

2008 Night Rod Special

VRSCDX-ANightRodSpecial2008.jpg

2008 Road King Classic

FLHRCRoadKingClassic2008.jpg

oka so should i go a hks hipower or a hks silent hipower cat back exhaust for my 32???

oh and will an R32 GTR cat back one fit a gtst/gts4 ??

need ya opinions

cheers

Edited by vinnie32GTS4

well, Ive been quoted petrol money change out of 2grand to fit and tune the following:

Cometic intake manifold gasket

Cometic intake collector gasket

Cometic exhaust gasket

Cometic Head gasket 1.2mm x 87mm

ARP head stud kit

EPP 6mm viton Intake valve seals

EPP 6mm viton Exhaust valve seals

EPP Intake valve seats

EPP Exhaust valve seats

EPP Intake valve guides

EPP Exhaust valve guides

Q45 90mm throttle body

Greddy Q45-RB25 adapter kit

EPP clear cam gear timing belt cover

Tomei oil gallery restrictor orifice

Tomei hi-lift valve springs ~8.8mm

Tomei 256/256 poncam camshaft set

Gates Racing timing belt kit incl. tensioner and idler

2x 700cc Sard injector external intake manifold setup

ryco oil filter, oil filter magnet set & Motul 4100 turbolite 10/40w oil

Need a controller for the extra injectors tho........................

expect, with the sards, there should be enough fuel injc. headroom to push a nice comfortable 230kw tune., with heaps big torque

:thumbsup:

then thats it, bar pistons/rings and rods/bearings; maybe in 5yrs time. lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...