Jump to content
SAU Community

Recommended Posts

Hi everyone im back :P im now living in my new house :huh: my laptop shat itself last week so i gave it to my mate to fix and only just got it back today, so what have i missed??

everything babe just go back about 300 pages and you will be ok

Rb30 keeps the 4wd and the low mounts (as low mounts are part of the head).

Everything bolts on as per normal. The sump adaptor bolts on to the bottom of the rb30 block and then on to the 4wd sump/diff.

-----

3k.. Sounds like an AFM issue. Make sure all the IC pipes are connected properly.

probably roughly 10k i assume for HKS version

Wanna keep the 4wd tho, and twin low mount's

Also Cubes brother has a R32gts-t got new coilpacks, plugs and serviced recently. anything over 3k the car starts chugging, any idea what it would be?

what cubes said! tell craig to get another afm. if he wants he can test mine out on his 32.

the cars gone into limp mode or whatever its called. happened to me and its a pain to drive!

hey ruby.... looking at getting a motor bike...

wats a good bike to look at? beginner also :thumbsup:

why you asking him.........you know what he's gonna say

"if it aint Italian, it aint worth havin", lol

Here's a bit of education for you:

2008 Fat Boy

FLSTFFatBoy2008.jpg

2008 Night Rod Special

VRSCDX-ANightRodSpecial2008.jpg

2008 Road King Classic

FLHRCRoadKingClassic2008.jpg

oka so should i go a hks hipower or a hks silent hipower cat back exhaust for my 32???

oh and will an R32 GTR cat back one fit a gtst/gts4 ??

need ya opinions

cheers

Edited by vinnie32GTS4

well, Ive been quoted petrol money change out of 2grand to fit and tune the following:

Cometic intake manifold gasket

Cometic intake collector gasket

Cometic exhaust gasket

Cometic Head gasket 1.2mm x 87mm

ARP head stud kit

EPP 6mm viton Intake valve seals

EPP 6mm viton Exhaust valve seals

EPP Intake valve seats

EPP Exhaust valve seats

EPP Intake valve guides

EPP Exhaust valve guides

Q45 90mm throttle body

Greddy Q45-RB25 adapter kit

EPP clear cam gear timing belt cover

Tomei oil gallery restrictor orifice

Tomei hi-lift valve springs ~8.8mm

Tomei 256/256 poncam camshaft set

Gates Racing timing belt kit incl. tensioner and idler

2x 700cc Sard injector external intake manifold setup

ryco oil filter, oil filter magnet set & Motul 4100 turbolite 10/40w oil

Need a controller for the extra injectors tho........................

expect, with the sards, there should be enough fuel injc. headroom to push a nice comfortable 230kw tune., with heaps big torque

:thumbsup:

then thats it, bar pistons/rings and rods/bearings; maybe in 5yrs time. lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Definitely do-able haha. I will give it a try if the fuel pump hanger does not solve the issue. Just need to find some quiet time in the area, Malta is like a big city and I live right next to the main hospital so it is very busy during the day. I'll be installing it in about 2 weeks, found a garage that is pretty knowledgeable and has the necessary tools. This garage has worked on multiple builds, even for competitions. They even asked me to stay with, so I should be fine.
    • Just to add, I found the r32 gtr ecu the most forgiving, the r33 one would get the shits. 
    • For what it’s worth I drove my gtr for over a decade with gt-ss as a true daily after I pulled off the -5s, I had it engineered and went with stock ecu etc.  never skipped a beat.    I would only worry if you can’t get good fuel all the time in a tropical paradise
    • I bought an engine from a friend of a friend many years ago, it was sold to me as a RB25det Neo.    recently I started pulling it apart and noticed that the intake manifold was pretty different from others that I had seen on RB engines so did a bit of research and found that it was a non turbo manifold. So I’m sceptical now that it is a NEO DET and just thinking it’s a NEO DE (it does have a turbo strapped to it currently).    can you identify the engine model from the numbers on the block?
    • Yeah you can. Cable tie the gauge to a windscreen wiper, or run it into the car and hold it with one hand, or have the neighbour's kid run alongside and tell you what it says.
×
×
  • Create New...