Jump to content
SAU Community

Recommended Posts

Hi everyone im back :P im now living in my new house :huh: my laptop shat itself last week so i gave it to my mate to fix and only just got it back today, so what have i missed??

everything babe just go back about 300 pages and you will be ok

Rb30 keeps the 4wd and the low mounts (as low mounts are part of the head).

Everything bolts on as per normal. The sump adaptor bolts on to the bottom of the rb30 block and then on to the 4wd sump/diff.

-----

3k.. Sounds like an AFM issue. Make sure all the IC pipes are connected properly.

probably roughly 10k i assume for HKS version

Wanna keep the 4wd tho, and twin low mount's

Also Cubes brother has a R32gts-t got new coilpacks, plugs and serviced recently. anything over 3k the car starts chugging, any idea what it would be?

what cubes said! tell craig to get another afm. if he wants he can test mine out on his 32.

the cars gone into limp mode or whatever its called. happened to me and its a pain to drive!

hey ruby.... looking at getting a motor bike...

wats a good bike to look at? beginner also :thumbsup:

why you asking him.........you know what he's gonna say

"if it aint Italian, it aint worth havin", lol

Here's a bit of education for you:

2008 Fat Boy

FLSTFFatBoy2008.jpg

2008 Night Rod Special

VRSCDX-ANightRodSpecial2008.jpg

2008 Road King Classic

FLHRCRoadKingClassic2008.jpg

oka so should i go a hks hipower or a hks silent hipower cat back exhaust for my 32???

oh and will an R32 GTR cat back one fit a gtst/gts4 ??

need ya opinions

cheers

Edited by vinnie32GTS4

well, Ive been quoted petrol money change out of 2grand to fit and tune the following:

Cometic intake manifold gasket

Cometic intake collector gasket

Cometic exhaust gasket

Cometic Head gasket 1.2mm x 87mm

ARP head stud kit

EPP 6mm viton Intake valve seals

EPP 6mm viton Exhaust valve seals

EPP Intake valve seats

EPP Exhaust valve seats

EPP Intake valve guides

EPP Exhaust valve guides

Q45 90mm throttle body

Greddy Q45-RB25 adapter kit

EPP clear cam gear timing belt cover

Tomei oil gallery restrictor orifice

Tomei hi-lift valve springs ~8.8mm

Tomei 256/256 poncam camshaft set

Gates Racing timing belt kit incl. tensioner and idler

2x 700cc Sard injector external intake manifold setup

ryco oil filter, oil filter magnet set & Motul 4100 turbolite 10/40w oil

Need a controller for the extra injectors tho........................

expect, with the sards, there should be enough fuel injc. headroom to push a nice comfortable 230kw tune., with heaps big torque

:thumbsup:

then thats it, bar pistons/rings and rods/bearings; maybe in 5yrs time. lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...