Jump to content
SAU Community

Recommended Posts

My situation is complicated at the moment, I've got an adapter plate for a 38mm wastegate but i'm starting to think the 38mm gate isn't going to be big enough. So im currently looking around at either another manifold to suit a bigger gate or mod my manifold...or bite the bullet and get the 38mm gate and take the risk.

The lower you want to run the boost the larger you want the wastegate to be. Judging on my mate's setup with the same turbo i will need a bigger gate.

hmmmm, i bought a new fish on saturday, he's a big boy, bout 17cm long

he is harrassing my females hardcore, there the same size as him but fuuk, hes rough!

anyone with a cold tank want him? i paid 15 bucks for the prick, he was a trade in from another customer, i now know why.

I think the r32 is more lenient with a slight difference as that example was what Dan was running on his gts4 and it was confirmed by willal that this is ok

It still will eventually cause problem with 32's but not as quickly as 33's and 34's as they run a mechanical 10% preload all the time (that is why you can't just pull a fuse in the later models). with the 32 it will still cause the clutches to burn out but the wearing will only occur when the ATESSA is activated, hence why it won't happen as quickly as the later models.

Edited by D_Stirls

I was watching this thing lastnight on Animal Planet about "Demonic Apes". God it was interesting. This place called Gombi or something where all these Chimpanzee's live, they actually eat more meat than fruit and veg. And there was the leader "Frodo" who was the most violent out of all of them and he actually abducted a baby and mutilated it, tore its skin off its face and all this.

There were scientists saying that he has a common link between him and us, calling it the demonic male syndrome. Where they think that fighting and murder is okay.

They were also showing Frodo attacking other Chimps and they said that he was actually enjoying it because he knew he was inflicting pain on the other chimp.

It was very interesting to watch. Just shows how much we think we know about things, but in reality, we're totally in the dark about it.

It still will eventually cause problem with 32's but not as quickly as 33's and 34's as they run a mechanical 10% preload all the time (that is why you can't just pull a fuse in the later models). with the 32 it will still cause the clutches to burn out but the wearing will only occur when the ATESSA is activated, hence why it won't happen as quickly as the later models.

+1

And the clutches aren't cheap to buy or fit.

Yeah no shit hey. Just put 10" on a GTR and don't be a nancy, right Adrian?

I thought my wheels hung outta the guards abit, Adrian your cars a joke! Flared guards man!

Edited by muirsky
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...