Jump to content
SAU Community

Recommended Posts

My situation is complicated at the moment, I've got an adapter plate for a 38mm wastegate but i'm starting to think the 38mm gate isn't going to be big enough. So im currently looking around at either another manifold to suit a bigger gate or mod my manifold...or bite the bullet and get the 38mm gate and take the risk.

The lower you want to run the boost the larger you want the wastegate to be. Judging on my mate's setup with the same turbo i will need a bigger gate.

hmmmm, i bought a new fish on saturday, he's a big boy, bout 17cm long

he is harrassing my females hardcore, there the same size as him but fuuk, hes rough!

anyone with a cold tank want him? i paid 15 bucks for the prick, he was a trade in from another customer, i now know why.

I think the r32 is more lenient with a slight difference as that example was what Dan was running on his gts4 and it was confirmed by willal that this is ok

It still will eventually cause problem with 32's but not as quickly as 33's and 34's as they run a mechanical 10% preload all the time (that is why you can't just pull a fuse in the later models). with the 32 it will still cause the clutches to burn out but the wearing will only occur when the ATESSA is activated, hence why it won't happen as quickly as the later models.

Edited by D_Stirls

I was watching this thing lastnight on Animal Planet about "Demonic Apes". God it was interesting. This place called Gombi or something where all these Chimpanzee's live, they actually eat more meat than fruit and veg. And there was the leader "Frodo" who was the most violent out of all of them and he actually abducted a baby and mutilated it, tore its skin off its face and all this.

There were scientists saying that he has a common link between him and us, calling it the demonic male syndrome. Where they think that fighting and murder is okay.

They were also showing Frodo attacking other Chimps and they said that he was actually enjoying it because he knew he was inflicting pain on the other chimp.

It was very interesting to watch. Just shows how much we think we know about things, but in reality, we're totally in the dark about it.

It still will eventually cause problem with 32's but not as quickly as 33's and 34's as they run a mechanical 10% preload all the time (that is why you can't just pull a fuse in the later models). with the 32 it will still cause the clutches to burn out but the wearing will only occur when the ATESSA is activated, hence why it won't happen as quickly as the later models.

+1

And the clutches aren't cheap to buy or fit.

Yeah no shit hey. Just put 10" on a GTR and don't be a nancy, right Adrian?

I thought my wheels hung outta the guards abit, Adrian your cars a joke! Flared guards man!

Edited by muirsky
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...