Jump to content
SAU Community

Recommended Posts

^chill out mitch, They are your neighbours...go in your room and play with your lego or something.

ryan your correct, its has a t3/t4 fange. not sure what 1.06 is can you fill me in on it.

cheers... michael

1.06 is the size of the rear housing on that specific turbo. A 1.06 rear on an rb25 will see boost far too late in the rev range. Your best option is to swap it for a .82 with an internal gate or .63 with an external gate to spool the turbo a bit earlier making use of the turbo on an upopened motor. By all means try it and it will still go fairly well, but you will pull it off later when you realise it's too laggy. A swap over rear housing from MTQ will set you back about 500-600 bucks.. Save yourself the pain and do it before you put it on.

Edited by Ryanrb25
just saw australia in gold class....

AWSOME movie!!! woot

I dont care what anyone says. You name a movie after a country and expect it to have any long lasting social value?

f**k no.

Luhrmann is an artiste. He's really good at creating unique pieces but cmon, last few movies he's made havent exactly been classified as realist.

I haven't seen this. I will though. And I hope my bias against this movie doesnt make me hate it unnecessarily. But whenever you try to summarize a country up in a 2 hour hollywood format movie, made for those people with short attention spans (and even less education about the world), then its pointless. So too is trying to find our national identity in a period drama. No offence to Campion, Weir, et al, but modern australia doesn't need to be reminded of colonial past; indeed its something that the nation needs to move away from, to truly embrace the potential of multiculturalism.

Anyhow f**kit. I've lost half of you already. Go drink more beer ffs, I know I will.

end rant.

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...