Jump to content
SAU Community

Recommended Posts

pffft. I'd give it a run on the street.

Haha, had a quiet laugh to myself then. If a nicely modified Skyline and that pulled up at the traffic lights, who would get defected first?

Edited by muirsky

hey guys, well im off to qld on friday so was just wondering whats a good but compact and cheapish digital camera to buy.

Im currently looking at a Panasonic one. 9MP, 10x optical zoom, 28mm wide angle lens, 3" screen, HD movies etc

cheers Steve. Currently comparing it to the cannon 980 IS and all tho the canon has higher mp the Panasonic is capable of more things.

anyone else who wants to have a look http://panasonic.com.au/products/details.cfm?objectID=4534

if you want unbiased review of camera's go to cameralabs.com

ALSO

Interestingly like its predecessor, there’s actually a higher resolution sensor in the body – a 10.7 Megapixel chip in the case of the TZ5 – but Panasonic only uses a smaller portion of it. This allows the camera to cleverly maintain its coverage across wider aspect ratios.
Source

Hey guys,

Hope everyone had a great Christmas!

Ok so my car just before started misfiring and running lumpy with the engine light on. I turned it off and back on a few times and then it was fine.... Would this most likely be a spark plug or dirty leads issue?.....it's just been serviced too.

Thanks :cheers:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...