Jump to content
SAU Community

Recommended Posts

IMO, George Bush and his public speaking will be sorely missed.

'The vast majority of our imports come from outside the country.'

- George W. Bush

'If we don't succeed, we run the risk of failure.'

- George W. Bush

'One word sums up probably the responsibility of any Governor, and that one word is 'to be prepared'.'

-George W. Bush

'I have made good judgments in the past. I have made good judgments in the future.'

- George W. Bush

'The future will be better tomorrow.'

- George W. Bush

'We're going to have the best educated American people in the world.'

- George W. Bush

'I stand by all the misstatements that I've made.'

- George W Bush

'We have a firm commitment to NATO, we are a part of NATO. We have a firm commitment to Europe. We are a part of Europe '

- George W. Bush

'Public speaking is very easy.'

- George W. Bush

'A low voter turnout is an indication of fewer people going to the polls.'

- George W. Bush

'I have opinions of my own -- strong opinions -- but I don't always agree with them.'

-George Bush

'We are ready for any unforeseen event that may or may not occur.'

- George W. Bush

'For NASA, space is still a high priority.'

-George W. Bush

'Quite frankly, teachers are the only profession that teach our children.'

-George W. Bush

'It isn't pollution that's harming the environment. It's the impurities in our air and water that are doing it.'

- George W. Bush

Nice find Damo

OMG ... Pete has turned into an caravan touring old man! :blink:

Would you like some tea with your scones while you watch the campers roll by? :P

Haha, you're a funny boy........I've been touring in a caravan for 5 years, nothing has changed bud......time to cut back on work and live a little!

Will eventually get into a '94 V-Spec 32 if I can find a mint one.

anyone want a slab of piss (or cash adjustment) to take my injectors out? i went thru the hassle last time so cbf doin it again, got em supposedly fixed and now there still leaking, so have to take em back to the workshop.

Edited by rhys5169

Pete:

My dad recently bought a 200 series cruiser GXL also (TTV8D), nice car! Fuel consumption isn't as great as toyota lead you to believe, BUT your right, enough torque to pull a house down :P

When pulling his 2T (fully loaded) camper trailer around NT/QLD mid last year he was averaging about 18L/100 from memory, whereas unloaded he would get about 12L/100. That was sitting on Highway speeds whenever possible, and more often than not 80+ on the dirt "highways".

Nice cars though :P

Pete, a few pages back, I managed to find a heap of 32 GTR's (not V-spec's) but they had genuine 30,000k's and stuff like that on them... basically garaged for years! They were going for about 25-30k.

It wouldn't be hard to find a mint condition one! There's still plenty left in Japan. You just need to fork out a bit for them.

Rhys, with your injectors, did you just replace the O ring? The actual injector might be split (happened with mine)

supposedly they where all looked over, cleaned, seals replaced and tested. but i dont belive this for a number of reasons

Damo & Chronic, nice finds boys but I won't even look at a GTR unless it's a V-Spec and mint late model V-Specs are indeed rare.

Pete:

My dad recently bought a 200 series cruiser GXL also (TTV8D), nice car! Fuel consumption isn't as great as toyota lead you to believe, BUT your right, enough torque to pull a house down :)

When pulling his 2T (fully loaded) camper trailer around NT/QLD mid last year he was averaging about 18L/100 from memory, whereas unloaded he would get about 12L/100. That was sitting on Highway speeds whenever possible, and more often than not 80+ on the dirt "highways".

Nice cars though :)

yeah I drove my VZ Berlina to Melbourne and left it at the Toyota dealer then drove the 200 back........at highway speeds I got 10.5L/100.........will be interesting to see how it goes towing 2.5 tonne.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...