Jump to content
SAU Community

Recommended Posts

so ,

ive just had a crazy thought .

seeing as my car is off the road and will be getting a new engine soon

so , im going to take everything i have to off the car to get it registered with a twin turbo

but im also thinking of registering it as a 2 seater , taking back seats out and getting an ADR approved half cage

is it possible to get it registered with the rb26dett , half cage & no rear seats ?

is it worth doing ?

so ,

ive just had a crazy thought .

seeing as my car is off the road and will be getting a new engine soon

so , im going to take everything i have to off the car to get it registered with a twin turbo

but im also thinking of registering it as a 2 seater , taking back seats out and getting an ADR approved half cage

is it possible to get it registered with the rb26dett , half cage & no rear seats ?

is it worth doing ?

Then your car would be legal lol

yeah i think it can be done

so ,

ive just had a crazy thought .

seeing as my car is off the road and will be getting a new engine soon

so , im going to take everything i have to off the car to get it registered with a twin turbo

but im also thinking of registering it as a 2 seater , taking back seats out and getting an ADR approved half cage

is it possible to get it registered with the rb26dett , half cage & no rear seats ?

is it worth doing ?

Yes it can be done. Yes it's legal. Yes do it.

Yes. Yes. Yes. Yes.

so ,

ive just had a crazy thought .

seeing as my car is off the road and will be getting a new engine soon

so , im going to take everything i have to off the car to get it registered with a twin turbo

but im also thinking of registering it as a 2 seater , taking back seats out and getting an ADR approved half cage

is it possible to get it registered with the rb26dett , half cage & no rear seats ?

is it worth doing ?

I did it with my car. Go to Regency and talk to the dudes at the Modifications desk, they will give you a form that you will have to fill out with the mods that you want to do. They will then send you out a letter which will tell you what other mods you will have to do to get it passed. All i had to do was fit GTR front brakes and get an emissions test, then got it inspected and passed :(

I did it with my car. Go to Regency and talk to the dudes at the Modifications desk, they will give you a form that you will have to fill out with the mods that you want to do. They will then send you out a letter which will tell you what other mods you will have to do to get it passed. All i had to do was fit GTR front brakes and get an emissions test, then got it inspected and passed :(

sweet as !

ill look into it when i get back from Melbourne :laugh:

You should've tagged along on Daves non-cruise Cara, ended up just being us in the 14 as Dale bailed home and we lost Vu :(

haha once u guys had left the car wash i didnt know which way u went!!!!!!! lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...