Jump to content
SAU Community

Recommended Posts

lol, i always thought +5 was pretty silly. hear 35mm boltons are pretty cheap these days. :thumbsup:

If yours were about 9's on the front and 11's min on the rear I would have talked prices haha.

It's so hard to get wide wheels with a nice - offset.

If yours were about 9's on the front and 11's min on the rear I would have talked prices haha.

It's so hard to get wide wheels with a nice - offset.

lol, what could you possibly need wheels that wide for? didnt know the mitsi was 5 stud. :thumbsup:

but yeah. pain in the ass finding good wheels in a decent offset.

lol, what could you possibly need wheels that wide for? didnt know the mitsi was 5 stud. :P

but yeah. pain in the ass finding good wheels in a decent offset.

Trying to put power to ground haha.

Mitsi is 6 stud, but hopefully getting some 33" MTZ on there ( If they fit ) :laugh:

I know I've been searching for months now and still nothing. :(

perfect for the 31, just dont wanna drop 1k on wheels.

$1k for decent fitting wheels to suit a 31 aint bad man, you arent gonna find much that will look half decent on a 31 for less than that.

Howdy everyone,

I have a dilemma aha,

I dont know where to mount 2 gauge that I have coming on their way and I'm scared the A-pillar pods will look tacky!

just put em on the dash...

or a buy a din cluster.

Trying to put power to ground haha.

Mitsi is 6 stud, but hopefully getting some 33" MTZ on there ( If they fit ) :laugh:

I know I've been searching for months now and still nothing. :P

yeah, true. with a potato potato under the hood, traction could be a small issue.

i barely searched at all for the meshies or the new set, but they sit freakin rad on the 14.

yeah, true. with a potato potato under the hood, traction could be a small issue.

i barely searched at all for the meshies or the new set, but they sit freakin rad on the 14.

I've said If I don't crack over 500 rears the motor will be out and a bigger one in! :laugh::P

f**k I expect to much. :(

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...