Jump to content
SAU Community

Recommended Posts

Just got back from a run guys,

Great weather for it car loved it. I need skinnier tyres or rolled guards now that it sits a bit lower,

I think I'll go with skinnier tyres and try that out as I dont want to roll and molester my guards ahaha.

200's pretty much done. just gotta refit the front bar and the cold side cooler pipe and fit the fuel pump. oil cooler was pretty lol, ended up using 4 fittings just on the return line so the hose could clear the rad support and the fmic.

spoiler looks pretty rad. as does my new 'silvia' badge on the boot.

so luke/wayne, hills runs will be in order soon. might bring back the midweek runs.

would post pics. but 3mb photos + capped internet speed = 5 day uploads.

Edited by scandyflick

joisus. GTR pumps are fair beastly compared to the 200's stocker...

and now im off to collect a free carton of beer from work. ;)

Edited by scandyflick
Just got back from a run guys,

Great weather for it car loved it. I need skinnier tyres or rolled guards now that it sits a bit lower,

I think I'll go with skinnier tyres and try that out as I dont want to roll and molester my guards ahaha.

Should had gave me a msg on Facebook! I would had come out!

check this thing out and their whole website. Want a 34R NUR with 18km on it?

http://www.zeleperformance.com/vehicle/r34...registered.html

Some very nice cars there ;)

http://www.zeleperformance.com/vehicle/r34...lack-pearl.html

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...