Jump to content
SAU Community

Recommended Posts

I am getting an alarm installed with twin immobiliser for my r33 skyline. The installer seems to think he cannont install the alarm/immobiliser with the turbo timer. Has anyone done this themselves? or know how to do it? Please advise me on this so i might be able to advise them.

He said it had to do with the alarm and australian standards.

thanks

Link to comment
https://www.sau.com.au/forums/topic/18849-alarm-with-turbo-timer/
Share on other sites

I have a HKS type 1 turbo timer with my alarm/immobiliser and they work fine together. I didn't do the wiring myself but I know it has been done via a relay, so when you turn the key off the alarm recognise that and the engine keep running off the turbo timer. There are no security issues because you are not bypassing anything just separating the two devices with the relay.

I have heard that some alarms either have provision for a timer, or inbuilt timers. If not it can be done via a relay as mine has been done.

Sorry I can't tell you exactly how the wiring is done, as I got it done by the guy who did my stereo install. I had been told by a few people that it couldn't be done also till I came across this guy. He just said alot of guys aren't aware how its done because it isn't that common, and that most guys that do these installs aren't true auto electricans.

Dunno how much truth there is in that, all I know is that mine now works and I can't fault any of the work he did. It is all quality, tidy work.

firstly, you cannot have the feature whereby the doors unlock when the engine dies

secondly, you need a bypass chip that allows u to look your car and immobilise after the engine dies. the chip cost me 38 bucks to add on to my pre-existing alarm.

send it to the shop that fitted your alarm and if the seem incompetent, send to another agent that does the same type of alarms :) hope that helps

firstly, you cannot have the feature whereby the doors unlock when the engine dies

yes this is true however you can have it so when you turn the key and pull it out the doors unlock then the turbo timer counts down. then you get out and lock the car via remote and the alarm arms. well thats my car anyways. oh and when you turn the car on both doors automatically lock.. pretty cool.

also when my car is being run via the turbo timer and you lower the handbrake it cuts out

as long as the immoboliser is not wiered to the fuel pomp the car will still run upn till the timer shuts down most ov the time thay cill the egnishon so theat u cant start it and when the hand brake is let down the car will stall and u cant start it with out the remote the key less entery shoud b abell to lock the car and armit if this is dun

this is what mine does.

i start boosting warhhhhh pshhhh pshhh ect you get the idear.

see some hot chicks, pull over.

decide im so cool that i turn off my ignition.

my blitz turbo timer kicks in, set for 1min or there abouts.

if i dont lock my car the imobiliser automaticlly sets after 30secconds.

if i lock the car the imobiliser is armed and the car is locked.

if i was to be in the car and locked myself in (which i tried) and put the key back in and try start it, the car turns off alarm sirens.

then my cars all locked, i go talk to da hot chix.

and all is cool.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • With the system, once you drive it for a bit, and before you turn the car off, does the car fix its date and time? When you say the date is wrong, what date does the vehicle think it is, and does it always show the same date? My thoughts from a process driven view is; The system may be defaulting to a standard start date/time. The main reason you'd typically see this occuring, is the system is losing its constant/backup power supply.   If its always defaulting to the same date/time at start up, and especially if it fixes itself while driving, I'd say either the non volatile memory has an issue, or the power supply to the volatile memory that stores this information.   The other thing I'd check is if there is anywhere in the system you can adjust the date and time from. If the date/time is still moving forward since it wished you happy new year, then it is 100% possible the system has just had a bit of data corruption occur, and you likely need to find a way to reset the date/time in the vehicle.
    • Scissor Jacks are an accident waiting to happen, the only time they should be used are in an roadside flat, even then a tyre and rim should be placed underneath 
    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
×
×
  • Create New...