Jump to content
SAU Community

V-band Clamp On Kkr430

jase33

By jase33,
in Forced Induction Performance

 Share

Recommended Posts

jase33 Enthusiast

jase33

Posted
Posted

Reseached with no luck.

I bought a KKR430 turbo the other day and m just doing some research before fiting it to my r33 series 2. I cant work out the new V-band clamp and how it fits.

I got the dump pipe that fis it as well.

Has anyone fitted one of these and know of any other problems i may encounter along the way to fitting this thing??

Thanks guys.

Jase.

Link to comment
Share on other sites
jase33 Enthusiast

jase33

Posted
  • Author
Posted
not sure what u mean about how it fits.

but if there is no bung in the dump pipe for your o2 sensor?

you will need that done before u fit it

The dump pipe conection is on the other side of the pipe so thats all good.

Link to comment
Share on other sites
jase33 Enthusiast

jase33

Posted
  • Author
Posted
just think of it as a hose clamp, just make sure the clamp is over both sides of the flanges lips

Thanks. I think i know what you mean, theres just an extra ring dude left over when I get it to "work". Do I need to use gasket goo or something? Im concerned that it will leak.

Link to comment
Share on other sites
jase33 Enthusiast

jase33

Posted
  • Author
Posted

Here is a close pic of the fitted clamp how I think it should be (note the hole on the dump pipe for the oxygen sensor) and the clamp on its own and the other steel part that I dont know where it goes. Did I get it right?

post-39053-1192181532_thumb.jpg

post-39053-1192181574_thumb.jpg

Link to comment
Share on other sites
Craved Grand Master

Craved

Posted
Posted

yep looks correct to me, V bands are more prone to leaking though

havent ever tried it but you could get a high temp sealer on that bead if your worried, gets used on 3 and 4 bolts exhaust flanges all the time

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      Rb25 Turbo Upgrade, All Dyno Results

      By TurboTapin · Posted

      2.8L Stroked S1 RB25 Fully built block (Spool&CP) and head (Ferrea & Kelford 272's). Hydro lifters.  Precision 6466 Gen2 1.00 T4 Divided. 2x 40mm Turbosmart open dump gates.  DW 1200cc injectors 2x AEM 320LPH Pumps Haltech Elite 2500, IC7, WB1, TC8, Etc.  4" Downpipe, 3.5" Catback.  94AKI (101.5ron) Pump gas + WMI (2x 1000cc nozzles) 463rwkws @ 27psi on a mustang roller dyno. 
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      I finally got it on the dyno today and luckily it stayed in one piece! It wasn't without its dramas though. First off, sent my power steering belt to the moon around the third pull. Scared me half to death. Tuner laughed and mentioned that often happens with RB's... I may need to look into adding the Ross power steering idler, or something a long those lines.  Second issue that came up was about 2 hours in, we realized the VCT wasn't working and had to go back through the timing and knock threshold once it was fixed (I had botched setting up VCT). That waisted a good hour or so. I was surprised to see that with VCT working, we saw a ~38rwkw difference across the powerband. More then I would of expected.  Without further ado, made 463rwkw@27psi. Not the numbers I originally set out after, but still more then enough to kill myself and I'm very happy. Mustang roller dyno's are known to be heart breakers compared to other dyno's. Two things that limited me, first was the hydraulic lifters/7600rpm cut. Tuner was adamant that I was losing out on a lot of power up top because of it. Second was the pump gas & WMI. He wasn't 100% comfortable tuning with WMI, and was honest about it. He stated he's more confident on E85/Race gas. I look at this as a positive as it leaves me a lot of room for improvement. All in all, very happy! I need to see what I can do about that rev limiter... I use to rev my stock RB20 to 8000rpm and now I have a fully built head that I only rev to 7600... It's bugging me.  Don't mind my fantastic picture/filming skills.  RB28 - Dyno (1).mp4      
    • ianp
      Share Your Euro!

      By ianp · Posted

      The Daily - 2011 Audi A5 And the camper VW transporter T5          
    • Milkmun
      Newbie from Geelong, Victoria

      By Milkmun · Posted

      Wow mate that's huge, congrats. Glad you found better people to deal with and all seems like it's going in the right direction.
    • The Bogan
      What Is A Good Setting For Street Camber?

      By The Bogan · Posted

      The best setting for street is what gives the best tyres wear for your driving style Different tyres like different camber You want the whole surface of the tread to wear flat, if the inside of the tyre is wearing more than the outside reduce camber settings For toe, have the minimum amount to give the handling you want Caster, from my experience if you can adjust it, is as much as you can get without clearance issues And while -2.5° of camber on the front might work well with good tyres for "spirited" cornering, it may be too much for a street car Lots of front camber will effect braking Just like to much rear camber will effect rear traction (rwd), and braking  When I set my Bogan Cruise Ship (VX SS) up for drags I tested how much tyre width I actually had in the rear by doing a hard launch (skid), it originally had -1.5° in the rear, and you could see that the tyre wasn't putting down alot of the tread, I maxed out the settings to get as little camber as I could with the OEM adjustment and some camber bushings and got it down to just under -0.5° with 0 toe, that gave me a fair bit more "rubber on the road" and helped it hook up for my 60' and my 0-100kph And with -1.5° in the front the big old boat handles fine on the street and my tyre wear is nice and even on both front and rear tyres (currently Hankook RS4's) As for semi slicks at the track, again, it depends on alot more IRT the suspension, the track and lots of other things, so, I'll leave that up to people who have more experience, especially with a AWD In saying this, street settings are pretty easy, just look at the tyre wear Meh, Necro thread, it's late at night, and I has been drinking beer
×
×
  • Create New...