Jump to content
SAU Community

Recommended Posts

Ok, DON"T USE WD40!!!!!

WD40 is a silicone spray, it will insulate the individual parts of the aerial from each other and your aerial wont work properly anymore!

What you need to do is use Electrical Contact Cleaner (available at Jaycar, DSE, etc) to clean anything (including the WD40 you just put on) off.

Then use some sort of petroleum-based jelly (Vaseline) on it. KY wouldn't work, it's water-based... :)

the carbon-type cleaner and graphite stuff are good çoz they weigh less and won't deminish your power-to-weight ratio!

and the petrolium jelly will make your car more areodanamic and go faster!

Put it all on... that's all the mods you need!

for those of you that think I'm a retard... I'm special OK, SPECIAL!

and yes... I'm just being a tool!

Did the AP12 fit your factory antenna?? Aerpro have a specific listing for Nissan's (AP252).

The AP12 is meant to fit the antennas manufactured by Aerpro, not any OEM vehicles (except Ford & Hondas... the Aerpro ones are OEM...)

Oh, what series R33 do you have?

The guy at autobarn told me that it would be really difficult to find a mast for an import skyline, so i just went with a generic kind of mast and tried it out.

The mast fit fine - the little ball on the top sticks out about 5mm higher. My car is a '95 series 1 front, but as i understand it is right at the changeover to series 2. It shouldn't matter though. The hardest thing is getting the antenna locking ring off if you don't have the 2 pronged thingy (!), and when you open up the mechanism everything flies out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...