Jump to content
SAU Community

Recommended Posts

guys just quickly, iv got an R33 S1 GTST, now the stock thermal fan at the front, wen does it kick in or does it. Iv heard it supposed to kick in wen the A/C is turned on, but it is NOT activated by temperature levels. Mine doesn't activate wen i turn the a/c on at all, does this mean its not working???

let me know ur thoughts

cheers

Link to comment
https://www.sau.com.au/forums/topic/189390-r33-thermo-fan-kick-in/
Share on other sites

it will only switch on when your a/c is on and you go ever a certain engine temp. the temp probe is the one screwed into the bottom of your radiator. you could check to see if the probe is plugged in. alternatively if you have or know anyone that has a consult cable and software you can do an active test where you switch it on through that.

yeah i believe it will come on with aircon when required.

on a side note, what happens when you put a fmic in front of that temp probe?

does it see temps as hotter and therefore turn on more readily? any adverse affects?

yeah i believe it will come on with aircon when required.

on a side note, what happens when you put a fmic in front of that temp probe?

does it see temps as hotter and therefore turn on more readily? any adverse affects?

nah that a different probe. the one your taking about is the outside air temp. there is one screwed into the bottom of the radiator, so that when the coolant/engine temp gets to hot it switches on. the only time i've ever heard the fan come on was in the middle of summer and in really heavy city traffic.

so that thermo fan actually kicks in to control engine temps???

i thought it was purely for the aircon

thanks fellas.

to comment i would've assumed it should kick in at high engine temps like other cars.

but like mentioned above i was told purely for aircon. so even if the aircon is on it wont kick in until a certain temp??

these cars must hav good cooling...!!

  • 2 months later...

yeah..thatur a/c fan..

does ur clutch fa come on??

if not...,thats wat i'll be worried about...

but for ur question lik a few people mention it should come o wen u press ur air-con...dependin on how hot it is aswel..if its required..

another question not related...

how people hear have done a clutch fan conversion to a thermo fan on a r33 skyline??

I will be converting to a 16" thermo fan as part of my RB30DET conversion. Fan will be spaced approx 30-40mm off the radiator and use the stock shroud. Fan opperation will be speed controlled using a picaxe micro controller and stand-alone temperature probe.

The whole process has been halted at the moment due to the x-mas break though...

I will be converting to a 16" thermo fan as part of my RB30DET conversion. Fan will be spaced approx 30-40mm off the radiator and use the stock shroud. Fan opperation will be speed controlled using a picaxe micro controller and stand-alone temperature probe.

The whole process has been halted at the moment due to the x-mas break though...

you'd be better off using AU falcon thermo's and shroud and simply attach to your radiator and seal the edges.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...