Jump to content
SAU Community

Brand New Garrett Gt3540r

Pax-Ottomanica
 Share

Recommended Posts

Pax-Ottomanica Experienced

Pax-Ottomanica

Posted
Posted

Item: Garrett GT3582R (External Wastegate)

Age: NEW

Condition: NEW

Price: $1600

To Fit: 2.0L - 4.5L

Location: Melbourne

Contact: 0433 269 072

Comments: For more information on the turbo, visit Sliding Performance or Garrett websites

I have brand new Garrett GT3540R (otherwise known as GT3582R) that has been sitting in my closet in box for the past 6 months. It has never been installed on a car and the only time it was taken out of its box was to have a look at it. My intentions were to install it on a my R33 GTST but recently decided to sell my car..

I bought it off Sliding Performance who is a SAU Business trader for $1770, you can click on my Trader Rading and read the comment for the proof of purchase. I still retain the recepits given by Sliding Performace.

Details of the turbo;

Garrett GT3540R 700hp Dual Ball Bearing Turbocharger

Garrett GT Turbochargers all come complete with full floating dual row ball bearing cartridge assemblies.

Compressor Specifications:

A/R : 0.70

Turbine Specifications: Flange: T3

A/R : 0.63

Horsepower : 700HP

PRICE: $1600

Pictures..

16102007.jpg

16102007001.jpg

16102007002.jpg

16102007004.jpg

16102007005.jpg

It contains factory original markings.. proof that it has never been used.

16102007006.jpg

16102007007.jpg

16102007008.jpg

16102007011.jpg

16102007013.jpg

Link to comment
https://www.sau.com.au/forums/topic/189487-brand-new-garrett-gt3540r/
Share on other sites
Pax-Ottomanica Experienced

Pax-Ottomanica

Posted
  • Author
Posted
this is a good price i had one a while go sold pretty quick you should put it on boostcruising.com they always after one of these

Thanks for the suggestion buds, much appreciated.. I will be doing that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...