Jump to content
SAU Community

Recommended Posts

Have a brand new in box complete turbineless hks gtrs bolt on kit for rb25det.

Will bolt up to r33 gtst and r34 gtt.

The kit comes with everything required for a direct bolt on to the existing flange.

Includes hks heavy duty actuator, oil lines, gaskets and bolts.

Planned on fitting this to my r34 gtt but am now selling the car so have no further use.

Paid $2600 3 months ago am looking for $2350 for it.

Located in miranda nsw, prefer pick up but will post at buyers expense.

Pm me if interested.

Edited by jonnnsyr33
2191.60 on nengun currently, if you are negotiable PM me.

-Ryan

thas not including delivery mate. Its currently $2363 delivered to nsw plus import taxes which i got stung a couple of hundred bucks

thas not including delivery mate. Its currently $2363 delivered to nsw plus import taxes which i got stung a couple of hundred bucks

yes thats right, like i said it cost me $2600 in total delivered from nengun

  • 3 weeks later...
Have a brand new in box complete turbineless hks gtrs bolt on kit for rb25det.

Will bolt up to r33 gtst and r34 gtt.

The kit comes with everything required for a direct bolt on to the existing flange.

Includes hks heavy duty actuator, oil lines, gaskets and bolts.

Planned on fitting this to my r34 gtt but am now selling the car so have no further use.

Paid $2600 3 months ago am looking for $2350 for it.

Located in miranda nsw, prefer pick up but will post at buyers expense.

Pm me if interested.

mate what sorta kws would this pull wid standered moteor but all the other mods eg power fc injectors etc etc plz pm me

upwards of 260 rwks, that guy with the green gtst, forgot his user name, was making close to 300rwks with cams and some head work

Edited by moonus

The limit of the turbo is about 270rwkw on pump fuel, using 17-20psi (will not make much more and definitely nowhere close to 300rwkw). I know i had one with Poncams and headporting. Don't forget, this turbo is rated at 400hp, which it about 300kw (AT THE FLYWHEEL), with drivetrain losses you're looking at 250-280rwkw; nothing more.

I would like to see that "claimed" 300rwkw GTRS powered Skyline on a Dyno that is not so "power happy". Or it could be possible that his drivetrain gearing is not std, thus fooling the power reading (ie: close ratio box, different diff gears, smaller wheels, etc)

Forgot to mention: This is a great turbo, especially for the R33/34. They are a perfect match to the rb25/25NEO. If i hadn't lost compression in cyl #3, at a track day, i would have not touched the combo. Absolutely the best compromise between power, lag, drivablity.

Good price, Good Luck with the sale :nyaanyaa:

The limit of the turbo is about 270rwkw on pump fuel, using 17-20psi (will not make much more and definitely nowhere close to 300rwkw). I know i had one with Poncams and headporting. Don't forget, this turbo is rated at 400hp, which it about 300kw (AT THE FLYWHEEL), with drivetrain losses you're looking at 250-280rwkw; nothing more.

I would like to see that "claimed" 300rwkw GTRS powered Skyline on a Dyno that is not so "power happy". Or it could be possible that his drivetrain gearing is not std, thus fooling the power reading (ie: close ratio box, different diff gears, smaller wheels, etc)

agreed, 300rwkw is beyond the compressor.

Have a brand new in box complete turbineless hks gtrs bolt on kit for rb25det.

What do you mean by turbineless mate? Do these turbos have internal waste gate to fit same dump pipe? I was going to buy one from nengun. I am interested in yours its a bit closer.

What do you mean by turbineless mate? Do these turbos have internal waste gate to fit same dump pipe? I was going to buy one from nengun. I am interested in yours its a bit closer.

These turbos are direct replacement to the std turbo; they are designed to bolt up to the std exhaust, std SMIC, std airbox. But obviously if you're buying this turbo you should have already upgraded 2 of the 3 std items :laugh: So if your existing mods fit your std turbo, then you'll have no issues fitting the GTRS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...