Jump to content
SAU Community

Recommended Posts

I may have missed this above, but just a few questions....

What Year is the car?

What crank are you using?

What block are you using?

What brakes are on the car?

Any work done to the Gearbox?

I'm looking for a circuit car, and trying to minimise any additional purchases...

car is 89model, crank is r32 GTR crank with JUN collar and Tomei Oil pump, R32GTR block prepped and blue printed, R32GTR brakes with slotted rotors, R32GTR gearbox,

  • 4 weeks later...
  • 2 weeks later...
Can't believe you're selling Jeremy. What's the new car you got?

Good luck!

bought an S13 for drifting, that way if i crash it its not a GTR im writing off.

Wheels in previous pics have been stolen currently has white gtst wheels fitted.

posting up some new pics as well

post-21361-1198396000_thumb.jpg

post-21361-1198396052_thumb.jpg

post-21361-1198396067_thumb.jpg

post-21361-1198396077_thumb.jpg

post-21361-1198396093_thumb.jpg

Edited by DVS32R

driving in sydney traffic slowing down for lights was in 3rd gear went to change to 2nd but couldnt, was jammed in 3rd gear, forced it out with a fair bit of effort, drove back to coast from sydney and 3rd gear crunches like no synchros.

drained gear oil and found the 3 little doobies that hold and align the baulk ring, synchro to the gear.

can either drop price and sell car as is or get a 2nd hand box put in...

Dude that is an awesome looking car but i dont think tyre walls would go very well with it.

Just picked up a 2nd hand 32GTR box from a front cut with stock motor, and 53,000ks on it.

will fit it asap so car will be all better.

also getting the rocker covers anodised a nice red this week, should help brighten the looks of the motor.

My mate just bought my stolen wheels without knowing so car will now be sold with 17x9 Sparco light weight wheels freshly painted with Federal tyres.

will post up pics tommorow

WTF? wow whats the chances, can u track the theif or too much hassle?

Tryin to on the sly, but heard he might have good relations with the rebels...

which means i stay away

  • 3 weeks later...

There seems to be a lot of confusion here, every one is asking me why i needed to put in new bearings.

so here is my answer

i have never killed any bearings, when i first built the engine i didnt know about the common rb26 oil problems. so i pulled the crank out and put on a JUN collar and Tomei oil pump (upgrading from the N1 pump i had on it) fitted an oil restrictor and external oil return, and i thought for the sake of 150 dollars i put some new bearings in. every one has been worried that the engine might have failed. which it hasnt.

Call me if you want to discuss 0414879711

cheers

Jez

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...