Jump to content
SAU Community

Wrecking R33 Gts-t '97 Model-offer To Sa First


Recommended Posts

don't think the alarm is "black wire" (to install/remove the wires to from computer to control box need to be cut/soldered to pass it through the firewall....they are then different colours from what's in cabin to what's in the engine bay) hope that makes sense

someone has put an offer on alarm/turbo timer combo for $220 but I'm after $235 if sold as a pair and waiting for his reply

re the 5 stud hubs your right I won't need them, I only need the backing plate etc, just need to buy a 36mm socket to remove the nut holding the hub on

Edited by PT

Do you have the black plastic thing that goes over the boot latch (When you pop the boot and look straight down at the boot latch, that black plastic cover) and how much?

Edited by kalel

I have painstakingly removed the wiring from the car/engine bay (all plugs have been labelled too), engine will be pulled out in 1-2 weeks, I will be selling the engine complete with turbo/alternator/air con compressor/ECU and entire wiring from the whole car (no gearbox/radiator or intercooler though). Not sure what it's worth though, done 70,000km.

manifold heat shielding will be sold with the whole engine

just looked then for you no black plastic cover over the boot latch sorry

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...