Jump to content
SAU Community

Recommended Posts

300rwkw in a gts-t would pull away from a gtr pretty easily.. maybe not up to 100 but from a rolling start no probs (e.g. 2nd and up)

Cheers for that mate. the plan is to make it a relialble 300rwkw weapon!!!

hehe, thats it :D

20k adventure is 300rwkw (reliably) :D

And no, it wont catch a GTR if is standing/low speed start. Not a chance.

money is not a problem mate, but it will still be a weapon hey

It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

I no wat ya sayin by imposing that question i meant a stock gtr, or 1 close to stock with a few mods, Wat turbo was he using?? that awsome power!!!

It will beat a stock GTR, it depands on what power and mods have been done to the GTR, you cant just say a 300rwkw GTST will beat a gtr, do you think it will beat a 400awkw GTR, no! Anyway my mate has an R33 GTST with about 310rwkw, his best time so far has been an 11.8 at WSID, that was on slicks. SO you should expect to be in the low 12s to high 11s, whic is an awesome time.

Sorry champ. If your mate's car made that power and only ran 11.8 on slicks then something is seriously wrong. What was the mph?

Agreed.

300rwkw is low-11's at the least on slicks. I'd be more inclined to aim for high 10s

I was thinkin low to mid 11's too, could a GT 3040 push me down the quater with 300rwkw??

I no wat ya sayin by imposing that question i meant a stock gtr, or 1 close to stock with a few mods, Wat turbo was he using?? that awsome power!!!

I dont know full details of the car but its been at WSID a few times lately, last time I saw him there he snapped a drive shaft. Maroan R33 GTST, I know he has a greddy plemium, 1000cc inj, power fc, forged internals, boost controler, and you probably wont believe this (nobody does) but he is using a $400 full ceramic turbo that he bought off ebay, I only know that its a top mount and its quite large. He says that it makes 310rwkw, I havnt seen the papers, But I was there and watched it do an 11.8 q/m so I know it does the times.

Sorry champ. If your mate's car made that power and only ran 11.8 on slicks then something is seriously wrong. What was the mph?

Cant remember the mph, think it was in the 120s though, Look I know this guy through a mate and we went to the runs together a few times. I am only stating what times he did and what power he said it made as an indication to the author of this thread, if it is a shit time for that power level then maybe it doesnt make that much power, I dont know??? But I think that thats pretty awesome for a backyard build on a gtst.

I dont know full details of the car but its been at WSID a few times lately, last time I saw him there he snapped a drive shaft. Maroan R33 GTST, I know he has a greddy plemium, 1000cc inj, power fc, forged internals, boost controler, and you probably wont believe this (nobody does) but he is using a $400 full ceramic turbo that he bought off ebay, I only know that its a top mount and its quite large. He says that it makes 310rwkw, I havnt seen the papers, But I was there and watched it do an 11.8 q/m so I know it does the times.

CERAMIC TURBO!!!!!! thats insane, ebay does wonder's hey. Cheers tho, an 11 second street car is wat i am chasing. You would think it would crack! the turbo i mean, with that power.

Agreed.

300rwkw is low-11's at the least on slicks. I'd be more inclined to aim for high 10s

I think your being abit optimistic, again remember these are street cars with average drivers, maybe if it was a fully set up drag car, with all suspension and proper tyres and gutted interior this might be achieved. He was running slicks but no doubt they were the cheapest second hand set he could get his hands on. I should also add that the 11.8 pass was with massive wheelspin off the line. ANyway its an indication, I think if you are building a car you should look at the worst it should do and if you do better you will be happy, If the author of this thread goes to the track aiming for a high 11s pass and gets a low 11 he will be happy. If he goes aiming for a 10 and has a few bad runs and cant better a 12 then he will have the shits.there is too many vairables to say what it will run but I believe that on a street car that is used everyday an 11s pass is awesome. Thats my 2c

CERAMIC TURBO!!!!!! thats insane, ebay does wonder's hey. Cheers tho, an 11 second street car is wat i am chasing. You would think it would crack! the turbo i mean, with that power.

Thats what we are all waiting for! I mean surely it cant last! But it is still going, I'll let you know if it lets go. I think if you get 300rwkw you shuld be able to get into the 11s but you have to be hard on the car, thats why he broke the drive shaft, snapped it clean. But I think at that power level 10s is abit optimistic, but 11s is achievable.

Thats what we are all waiting for! I mean surely it cant last! But it is still going, I'll let you know if it lets go. I think if you get 300rwkw you shuld be able to get into the 11s but you have to be hard on the car, thats why he broke the drive shaft, snapped it clean. But I think at that power level 10s is abit optimistic, but 11s is achievable.

Snaped clean sh it hey, cheers for that mate let us know if it does crack...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...