Jump to content
SAU Community

Recommended Posts

Just about to fix up the install of my noisy GTR fuel pump into R33 GTST.

It's wierd mine is the same noise at idle and reving. You can notice it hissing very loudly at idle but once driving you cant hear it so much cause of wind noise and exhaust etc. Most say there is a dual voltage on them so at idle it is quiet. I cant see any changes to the wiring etc.

Also considering going a Tomei.

Just wondering if the both pumps should sound about the same if mounted correctly? If so I will stick to the GTR pump.

I see a lot of threads about noisy GTR pumps.

From what I can see they are virtually the same pumps (Tomei and GTR) but mounted differently?

cheers

Edited by benl1981
Link to comment
https://www.sau.com.au/forums/topic/190339-noise-from-tomei-and-gtr-fuel-pumps/
Share on other sites

Cheers Birnie. I have the new GTR one ready to go in though. I would have to wait for the Tomei. I had a closer look - I reckon they are actually the same pumps. Has anyone taken off the rubber on the Tomei and seen what is underneath?

Whereabouts are you now Birnie? You still coming down to Syd?

Thanks for the offer.

the tomei one in the GTR and the S13 are both noisier than stock GTR, the tomie pump in the GTR one is less noticeable though as there is more material in the car between the driver and the pump.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...