Jump to content
SAU Community

Recommended Posts

Hey,

Found out my R32 gtst steering rack is leaking and was thinking of what to do next.

I can either get it rebuilt for $500 or purchase a 2nd hand one and replace it.

Was wondering if the r33 gtst steering rack is exactly the same as the r32 gtst?

The r33 rack would be newer than the r32 and possibly have less wear to it, so may be the best choice.

Also, ive noticed that when i turn the steering wheel just past the freeplay point, i get some sort of motor grinding noise coming from the shaft of the steering wheel. Would this be related to the leaking steering rack?

My steering also gets stiff on cold and loose when weather is hot.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/190344-steering-rack-r32-and-r33-the-same/
Share on other sites

hey Pat, i just bought a second hand rack for a 32. I got told that it was $350 for a rebuild which i thought was expensive enough - but not that bad compared to your $500!

But my current rack i physically bent - so can't rebuild. i paid $175 for a used 32 rack - i haven't put it in yet, fingers crossed that its not stuffed already!

  • 3 weeks later...
  • 1 year later...

masTers, can you confirm that the power steering racks are interchangeable betwen the models below; or if they aren't which are interchangeable

R32 GTR

R32 GTS4

R32 GTSt

R33 GTR

R33 GTSt series 1

R33 GTSt series 2

Thanks,

Ben

i have a spare power setup as i have a manual rack in mine ATM, has great feel.... you thought about going to manual steering?

Hey mate could you give us fellow's a quick run down of whats involved in goin to a manual rack?

Thanks alot for your time/help

Dale

I bought the car like this, it is a converted R32 rack from what i know, apart from 3-point turns i dont notice it anymore, not much heavier than a datsun 1600 with f**kEN AWESOME FEEL/FEEDBACK. once i got past the discomfort from 3 scaphoid fractures i love/d it(still hurts every now and then but its getting better) :blink: pretty sure primal garage who can be contacted through "Xris" on www.nissansilvia.com did the work.

I will hopefully be at DECA in August and will let you know how it goes on a mini track then, but apparently it is fine to slide it like this :)

  • 2 years later...

240 sx

200sx and the

a31 cefiro's have the same steering rack as " r33 skylines the gts T" ones. i have researched properly and deeply no doubt even the minute parts are ditto part numbers are the same.

go ahead for more haan??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
    • But they do so for the other reasons to have a compressor bypass. It's in the name.
×
×
  • Create New...