Jump to content
SAU Community

Tial Wastegate Issues

Mushroom

By Mushroom,
in Engines & Forced Induction

 Share

Recommended Posts

Mushroom Veteran

Mushroom

Posted
Posted

Hey Guys,

I have an older Tial wastegate and I am trying to find the gasget that goes between it and the manifold. Now I have been told it should have a raised beveled edge on it to help seal it but have been unable to find one can anyone help??? A workshop has been looking but so far have been unsuccesful at locating one and can only offer purchasing a new one.

As the wastegate works fine and I really don't want to have to buy a new wastegate if I don't have to.

Cheers

Mushroom

Link to comment
https://www.sau.com.au/forums/topic/190489-tial-wastegate-issues/
Share on other sites
lineskee 33 Community Regular

lineskee 33

Posted
Posted

were you after that metal ring that goes into the end of wastegate or and actual gasket? if its the gasket im thinking of you can buy them from autobarn. turbosmart make 38mm sized ones, not sure bout other sizes tho.

Mushroom Veteran

Mushroom

Posted
  • Author
Posted

well it bolts on to the manifold which is flat and has 4 bolt holes, so I am thinking there is suppose to be a gasget that stis between them and has a raised beveled edge to help seal it . I will take some photos later this week to expalin more if it helps

Craved Grand Master

Craved

Posted
Posted

does the wastegate have the seat area machined out ???

tial-hw-wg38wseat_m.jpg

as you can see the samll ring that inserts into the flange area between the gate and the manifold .. is this the bit you are missing?

try to speak with tial USA and see if can get that part seperate from them. as that ring seals the valve to the sides so it doesnt leak

Craved Grand Master

Craved

Posted
Posted

yeah, no chance of goo working there

either have a replacement machined up on a lathe

OR

buy a new one from tial USA - or try Slide as he got my tial from japan and might be able to get the individual part

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...