Jump to content
SAU Community

Recommended Posts

Hi all,

Im planing to do this conversion around the middle of next year. But if funds permit i may do it a little earlier. Ill use the GTR rear dif and try get GTR brakes all round. My quetion is what box do u guys recomend as im not doing the AWD conversion i cant use the 6 speed box unfortunately :D How strong is the GTST box? as i want to do everything right the first time so when i have a bit more money down the track i can go for bigger power with fewer issues. Has neone done this conversion or have ne advice to give me it would be greatly appriciated.

Cheers

John

Link to comment
https://www.sau.com.au/forums/topic/19088-na-to-rb26dett/
Share on other sites

haha yeah thats cool, i was always under the impression they were 6 speed?? oh well im not missing out on nething then, also a gtr half cut is around 6g's ive been told as a real approximate around 10g's give or take a few. but i will also need new wheels aswell, so im giving myself a 15g limit for when i do it so i should be able to do a few mods straight away aswell. from my current insurace policy they only quoted 160 bucks extra for the conversion, and im 17 rating 5!!! i made the mistake of not getting it in writing cause im sure id never get a quote like that again it must have been a mistake.

Link to comment
https://www.sau.com.au/forums/topic/19088-na-to-rb26dett/#findComment-401751
Share on other sites

i saved since i was like 10, working at my grandfathers company, then when i was old enough i worked at maccas aswell, i started saving for a car before i even knew what a skyline was, i managed to put together 10g's and my parents gave me another 6. and by the middle of last year i was a very proud owner of a skyline, since then every dollar i have earnt has gone into my car. And after y12 im planning to take out a 15g loan and do the converion.

Link to comment
https://www.sau.com.au/forums/topic/19088-na-to-rb26dett/#findComment-401828
Share on other sites

this might be a stupid question but why are you getting the extractors if you're doing the conversion next year? i hope you go ahead with the conversion, it would be good to see it done and that way i'll know exactly what needs upgrading so I can do it to my car once i finish uni :D

what age do you get your license in queensland? i get mine in less than 3 weeks!!

Link to comment
https://www.sau.com.au/forums/topic/19088-na-to-rb26dett/#findComment-402044
Share on other sites

u get ur learners when ur 16 and 6 months and have that for 6 months then u get ur p's then stay on them for 4 years. Yeah i figured the extractors wearnt too pricey and i just wanted i little bit more performance from my car for now, the high flow insert also isnt too pricey and an apexi afc i can use with the new engine.

Link to comment
https://www.sau.com.au/forums/topic/19088-na-to-rb26dett/#findComment-402060
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
    • Hello everyone, I am happy to join you.
    • Whereabouts are you, that looks exactly like Akira's old car....
×
×
  • Create New...