Jump to content
SAU Community

Wtb R33 Standard Manual Gear Knob

jimnastic

By jimnastic,
in Wanted to Buy

 Share

Recommended Posts

jimnastic Collaborator

jimnastic

Posted
Posted (edited)

Hey guys, pretty much what it says in the title.. I'm looking for a standard R33 gear knob as wanna make my car look as stock as possible :D

Any help would be very much appreciated!

Edit:

I just thought I'd stick a picture of my current gear knob on here incase some one was interested in a swap. It's only about a month old and cost me about $30. Its the type that has three screws to hold it onto the stock gear lever, but it also came with rubber inserts that can be used as well

The reason I wanna get rid of it is because I bought it to replace the crappy gear knob that was in the car when I got it, and it was the only half decent one I could find, but I never really liked the look of it. I can include original packaging and all of the parts it came with, but obviously I don't mind simply paying cash

post-42233-1193731311_thumb.jpg

Edited by jimnastic
Link to comment
https://www.sau.com.au/forums/topic/191417-wtb-r33-standard-manual-gear-knob/
Share on other sites
kudos.motorsports Grand Master

kudos.motorsports

Posted
Posted

If you get stuck I can help with a leather Nismo item for $66 + Postage. If you're interested they can be purchased here.

32865-RN003.jpg

jimnastic Collaborator

jimnastic

Posted
  • Author
Posted (edited)
If you get stuck I can help with a leather Nismo item for $66 + Postage. If you're interested they can be purchased here.

Thanks, I don't really want to spend that much but I'll keep the offer in mind if I can't get what I'm after :P

Edited by jimnastic
jimnastic Collaborator

jimnastic

Posted
  • Author
Posted
I have one in Sydney, where are you at?

I'm in Mudgee lol.. it's in the middle of nowhere, about 3 hours from sydney. Reckon you could post it? Or will you only do pick up? PM me with a price if you are able to post. Thanks!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...