Jump to content
SAU Community

Recommended Posts

Hey,

A few months back i decided to make some wide body guards for my skyline, fix the front bar, and also attempt to re-spray the whole car myself.

Finally sprayed the last coat of clear last night, still need to wait a few days and wet-cut the clear before applying some wax to give it that showroom finish.

Let me know what you think...

The smashed front bar...a mate backed into it with a tow ball

post-24877-1193785031_thumb.jpg

My first attempt at fibreglassing...

post-24877-1193785188_thumb.jpg

Ta da! ...it only took aout 8000 hours of fibreglassing and sanding...

post-24877-1193785254_thumb.jpg

The beginings of the rear guards...

post-24877-1193785432_thumb.jpg

post-24877-1193785449_thumb.jpg

The guard off the car...

post-24877-1193785523_thumb.jpg

Now to spraying....add one of these :

post-24877-1193785672_thumb.jpg

and some of this:

post-24877-1193785708_thumb.jpg

And you end up with this...

post-24877-1193785755_thumb.jpg

post-24877-1193785774_thumb.jpg

post-24877-1193785864_thumb.jpg

post-24877-1193785946_thumb.jpg

post-24877-1193786142_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/191528-r33-wide-body/
Share on other sites

Looks good dude, they looks made widebody. How long did it take to do all that?

The 33 im getting has crap paint and im thinknig of spraying it matte black. How long did the job take you?

Are you qualified or was it just mucking around on you're own car?

Edited by S04R3R
Link to comment
https://www.sau.com.au/forums/topic/191528-r33-wide-body/#findComment-3445770
Share on other sites

Looks good dude, they looks made widebody. How long did it take to do all that?

The 33 im getting has crap paint and im thinknig of spraying it matte black. How long did the job take you?

Are you qualified or was it just mucking around on you're own car?

It took a while, cos i hadnt done anything like it before it was a little experiemental!!

All up it probably took me at least 10 weekends worth...

The sparying didnt take all that long, its the prep that takes the longest!

Matt black would look awesome, if your gonna do it yourself here's some tips i'd recommend:

1. Spray booth, make sure you do it in a double garage, that you can close up completely and have plenty of room to move around.

2. Sanding back, use 280 first round, then 400 to smooth it off. use 600 wet and dry after your first two coats of primer.

3. take your time spraying, watch out for over spray.

I'm far from qualified matey, haha! just mucking around at home...

All up i saved heaps of cash by doing it myself. total cost including compressor, paint, materials, fibreglass and everthing came in under $1200!

Link to comment
https://www.sau.com.au/forums/topic/191528-r33-wide-body/#findComment-3445807
Share on other sites

Just a super cheap one, it was on special for $160

it came with a tool kit including all the fittings etc, a few tools as well (like an air gun for wheel studs and what not).

The compressor is a 2.5HP/40Litre, i would go bigger though, cos it was on fairly constantly, the only break it had was when i was re-filling the pot!!

The spray gun i bought was from bunnings, just a cheap $60 one. it was okay, does the job fine, you just have to fiddle around with the settings a bit to get the right spray coming out...but that half the fun hey...

Link to comment
https://www.sau.com.au/forums/topic/191528-r33-wide-body/#findComment-3445857
Share on other sites

Did you have any practise first?

nope..haha just went all in...

the fibreglassing is pretty forgiving as you can simply add more, or sand it off...but its very hard to get it super smooth. the spraying is another story though, the silver colour is really hard to get it looking smooth throughout, porbably should have chosen another colour, but it would have been more work then, doing all the inside of the doors, engine bay etc..

Link to comment
https://www.sau.com.au/forums/topic/191528-r33-wide-body/#findComment-3446026
Share on other sites

Looks tops!

How do you graft the fibreglass to the body?

well i made the guards as a seperate piece, then used pop rivets to secure the guards to the car...scary drilling holes in the body!! i also used a poly-urethane compound to seal the edges in. where the guard meets the car at the top i used a plastic putty which dries really hard and can be sanded to suit!

Link to comment
https://www.sau.com.au/forums/topic/191528-r33-wide-body/#findComment-3448134
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...