Jump to content
SAU Community

Recommended Posts

I don't normally do this, but just in case any fellow SAU'ers are interested, be a shame not to tell you:

The position is also listed on the jobs NSW web site and has been in several papers.

Don't be scared about the tertiary quals, really only need HSC or equivalent, this is a start up position, so I reckon the ad was always aiming too high.

Job is 50/50 field office, and you get to play with some high tech toys and cruise around in a Landcruiser from Canberra to the SA border. Theres two positions, Tumut and Leeton, sorry no ACT, but you could get back to ACT once you have experience etc

Job Summary

Agency Name WATER AND ENERGY, Department of

Job Classification Miscellaneous Professional Officer GS/Grade 1

Location Riverina, Tumut

Employment Status Permanent Full-Time

Vacancy Ref Job Reference No DWE2007/538

Closing Date Friday, 16 November 2007

Total remuneration package to: $71,537.00 ($42,743.00-$64,827.00)

Collection & management of surface water, ground water & other associated hydrometric data. Assist in supporting NRM strategies, water sharing plans, monitoring & compliance programs. Assist in maintenance & testing of hydrometric network equipment.

Selection Criteria

Appropriate Certificate, Diploma or other Tertiary Qualification and/or extensive knowledge/skills associated with the function and responsibility of the position.

Good numeric and computer skills with demonstrated capacity to collect, interpret, archive and disseminate hydrometric field data.

Ability to follow procedures and work carefully and accurately with numerical data including the capacity to implement quality assurance programs and procedures.

Good written and oral communication skills as well as problem solving skills.

Ability to swim (documentary evidence will be required), row a boat, work at heights and occasional heavy lifting and to work safely outdoors and in isolated areas.

Mechanical, electrical or electronics aptitude.

Ability to work independently and in teams including an ability to prioritise and plan activities.

Current drivers' licence.

Knowledge and understanding of Equal Employment Opportunity (EEO)

Knowledge and understanding of Ethical Practice

Knowledge and understanding of Ethnic Affairs Priorities Statement (EAPS)

Knowledge and understanding of Occupational Health and Safety (OHS)

Notes

This position will require independent and lone work in isolated areas, overnight stays and extended periods away from base (sometimes at short notice). Previously advertised as a temporary position for 3 years as DWE2007/527. Previous applications will be carried forward.

Inquiries

Daniel Hannon

(02) 6941 2249

Link to comment
https://www.sau.com.au/forums/topic/191796-anyone-want-a-great-job/
Share on other sites

Sounds like you need a background in that area or some science degree though doesn't it? I may be interested in applying, but I need documentation showing I can swim, because I don't have that at the moment lol

If you know a swim instructor, or just go to a pool somewhere and get them to watch you swim and issue a certificate, not hard.

We have employed ppl with Enviro Science degrees before, but also employed those with relevant experience or experience/knowledge that is equivalent. Because the job is so specialised, you tend to learn all you need to know on the job. You can also enrol and do a 3-4 year correspondence course and become a fully qualified hydrographer. then the pay is more like 75k, but if you get into management then the pay can go +100K and thats in DWE, private consultants can do much better [but the risks are greater].

Honestly the best ppl are those that have a good smattering of all sorts of skills, electrical, IT, welding, boating, fabrication, data, chainsaw, techheads, as well as quals etc jack of all trades, master of none and you don't get that in Uni alone, it takes a uni going farm hand who loves IT/computers.....................but having said that, we all have to start somewhere.

And with the Feds kicking in $10 billion over 10 years for the Murray darling, we are in a growth trend big time atm.

I can explain better via phone, if anyone is interested either phone the number in the ad, or PM with your number and I'll phone you////or I'll give you my mobile number and you can phone me instead.

Big sell over :):w00t:

  • 1 year later...

Will have another 6 jobs in South West NSW and several more scattered over the rest of the state. Temporary full time until June 30 2010. But some jobs will end up full time permanent. Look in SEEK website, search on Natural Resource Officer (Hydrometric)

Otherwise the selection criteria is basically the same, one thing, they are now stipulating tertiary eds, but I'd give it a try even if you don't have them. We only got 3 applicants for the last one, so I don't see how they can fill 6 when you are flat out filling one.

The below is only a cut and paste and could have errors, so use the advertisement when you find it, not what is below. This is just a heads up!!!

________________________________________________________________________________

_____________

The position is will be listed on several web sites and in several papers. Look for it next week.

Job is 50/50 field office, and you get to play with some high tech toys and cruise around in a Landcruiser from Canberra to the SA border. Theres one position Buronga, one Leeton, and four Tumut.

Job Summary

Agency Name NSW Office of Water

Job Classification Miscellaneous Professional Officer GS/Grade 1

Location South West NSW

Employment Status Temporary Full-Time

Vacancy Ref Job Reference No TBA

Closing Date Friday, TBA

Total remuneration package to: $72K ($42K-$67K) approx.

Collection & management of surface water, ground water & other associated hydrometric data. Assist in supporting NRM strategies, water sharing plans, monitoring & compliance programs. Assist in maintenance & testing of hydrometric network equipment.

Selection Criteria

Appropriate Certificate, Diploma or other Tertiary Qualification and/or extensive knowledge/skills associated with the function and responsibility of the position.

Good numeric and computer skills with demonstrated capacity to collect, interpret, archive and disseminate hydrometric field data.

Ability to follow procedures and work carefully and accurately with numerical data including the capacity to implement quality assurance programs and procedures.

Good written and oral communication skills as well as problem solving skills.

Ability to swim (documentary evidence will be required), row a boat, work at heights and occasional heavy lifting and to work safely outdoors and in isolated areas.

Mechanical, electrical or electronics aptitude.

Ability to work independently and in teams including an ability to prioritise and plan activities.

Current drivers' licence.

Notes

This position will require independent and lone work in isolated areas, overnight stays and extended periods away from base (sometimes at short notice).

Inquiries

Daniel Hannon

(02) 6941 2249

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...