Jump to content
SAU Community

Recommended Posts

Hey people, bout that gold engine bay.

Ive tried to contact the seller on ebay twice with no luck. Anyone else had a go and got a reply.

I asked if the goldness made it the super dooper R33 "G spec" go harder.

Could also be the new "gold-dilla" people are ravin' bout!!

Nahhhh, jokes aside....no response!!!

EMZ

It looks to be a Series 2 that has had a front end crash. The owner probably realized or couldn't find series 2 head lights and bonnet because they're rare to find and expensive and just used a 4-door series 2 front bar. In any case I wouldn't be touching this car. 'ONE OF THE FASTEST IMPORT RACER' This unintelligible comment would turn me off the car instantly.

lol half these jokers dnt no wat it is..mate its a series 2

the front lights,front bar,its got the abs thing inside the enginebay whereas series 1 and 1.5 dnt.

the wing also is series 2.the front bar looks like a series 2 bar but looks like its been changed a lil not sure hes got shit pics.

Thanks for the heads up mad82.

Also just to let people know ive tried to contact the seller of the R33 with the custom gold engine/bay and currently awaiting a response. Ill posta again when i have an answer!

EMZ

When you call Abdul Rauf on 0430093068.

Tell him his car stinks. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...