Jump to content
SAU Community

Recommended Posts

hi,I have just got myself a r32gts4 man.std but for 3inch ex,hks bov,k&n panel filter.want to upgrade,but have some questions,where to start?,i have Haltec interceptor,will this do the job? im guessing i/c,dump,ecu,injectors would be some of the first things to look at,so was hopeing for advice on where to start..stdRB20 5spd.cheers.$2000 to spend for now..

Edited by Jamie72
Link to comment
https://www.sau.com.au/forums/topic/192146-mods-for-r32gts4/
Share on other sites

Get yourself a front mount kit from just jap they seem to work fine, a good dump pipe if you dont allready have one, chuck the rubbish k&n filter in the bin keep the airbox just put in a BMC or APEXI panel filter a good boost controller preferably Electronic and closed loop (AVCR or HKS EVC) sell the interceptor and get full management of some form (cough power fc cough) the ecu is the key to so many doors, if i had my time again i would buy that first before anything else if your a newbie spend some time and research before you buy you will also learn heaps along the way.:) hope im a help of some form

Get yourself a front mount kit from just jap they seem to work fine, a good dump pipe if you dont allready have one, chuck the rubbish k&n filter in the bin keep the airbox just put in a BMC or APEXI panel filter a good boost controller preferably Electronic and closed loop (AVCR or HKS EVC) sell the interceptor and get full management of some form (cough power fc cough) the ecu is the key to so many doors, if i had my time again i would buy that first before anything else if your a newbie spend some time and research before you buy you will also learn heaps along the way. >_< hope im a help of some form

thanks ,that should point me in the right direction,got a blitz dual sbc,should be ok?

You can end up spending alot more than you would buying a real GTR as something worth keeping in mind.

If you want something fairly mild then;

* Exhaust is a good place to start (turbo back).

* Aftermarket ecu, sort timing and fuel out prefferably or S-AFC.

* Clutch and Flywheel upgrade will be needed once power is up , a lightweight flywheel while your at it.

* You will need fuel pump and injectors once you step into an upgraded turbo

Lots of things you can do really but, depends on what you would like the car to be.

If you want lots of power in the long term, just save for a built RB26 it more or less drops straight in with very few bits to get. The GTS4 gearbox is the same strength wise too, it's not the poxy RB20 box out of gtst's.

For the record the K&N panel filters are fine and re-usable, sorry 13thracer I've used exactly the same panel filter on a high powered GTR (among other cars) with more power than the lowly RB20 is ever going to produce. People only have issues with them when they don't read instructions and over oil them.

Have a good read of some of the links here:

http://www.skylinesaustralia.com/forums/t66556.html

Specifically this one:

http://www.skylinesaustralia.com/forums/t45218.html

Goes over the basic items for you.

Cheers

You can end up spending alot more than you would buying a real GTR as something worth keeping in mind.

If you want something fairly mild then;

* Exhaust is a good place to start (turbo back).

* Aftermarket ecu, sort timing and fuel out prefferably or S-AFC.

* Clutch and Flywheel upgrade will be needed once power is up , a lightweight flywheel while your at it.

* You will need fuel pump and injectors once you step into an upgraded turbo

Lots of things you can do really but, depends on what you would like the car to be.

If you want lots of power in the long term, just save for a built RB26 it more or less drops straight in with very few bits to get. The GTS4 gearbox is the same strength wise too, it's not the poxy RB20 box out of gtst's.

For the record the K&N panel filters are fine and re-usable, sorry 13thracer I've used exactly the same panel filter on a high powered GTR (among other cars) with more power than the lowly RB20 is ever going to produce. People only have issues with them when they don't read instructions and over oil them.

thanks for the great info.happy about the gearbox,definate bonus.and that i didnt waste my 90 bucks on the k&n :rofl: i`m thinking the power fc seems like the way to go.exhaust is 3inch from turbo back,has hks voltage stabiliser,...ps.will the apexi pfc work with my blitz dual solinoid b/c ?

as you may or may not know the gts4 is a bit heavy..i think as heavy as a gtr but it has the power of a gtst. Therefore making it a bit lighter would help to

here is a thread about making a r32 gts4 lighter i started a while ago

R32 GTS4 Lighter

hope it helps :P

weight reduction is good :D:):D:) dont quote me but from memory the oldschool drag racers used to say loosing 400 pounds is equal to adding 100 HP and the best thing about weight reduction less impact on your driveline and most of it is free.

Edited by 13thracer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The front prop shaft from my GTR had very notchy unis, which obviously needed replacement but unfortunately uses the (usually) non-replaceable (staked) type.     A new shaft is something like $2K plus shipping from Japan.   I wouldn't even bother asking the local Nissan spares dept.     Rang Hardy Spicer but no go, which surprised me a little.     There's a place over Dandenong way that would make me a 'performance' shaft but un-necessary in my situation.   They claimed to be getting the equipment in to replace staked unis but couldn't give me a timeframe.   Anyway, long story short, found a place to do the work just 5 mins from me: https://knoxdriveshafts.com.au $420 (cash) and about a week later I have my driveshaft back.   Price includes balancing. Owner is a one man band working out of a shed in his backyard but from what I could see he's very well setup with some expensive equipment.  
    • Thanks. That's what I was after. One of the kits, the o-ring side is too big diameter. The other kit is a plate with a o-ring to seal and the hose connection offset.
    • oops that seems much easier lol. 
    • Are you using the factory rail?  Is there any reason you don't want to use one of the two you already have, they don't have to attach to the fuel rail directly.  If you 100% must have a FPR that directly bolts to the fuel rail, you could get a Radium setup. I use a radium fuel rail and the direct mount regulator, it is quite a sexy setup. 
    • https://www.google.com/search?q=adjustable+fuel+pressure+regulator+nissan+fuel+rail+adapter&sca_esv=6710113de42d5150&source=hp&ei=GhPbaNHfNZeinesPyPqEiQc&iflsig=AOw8s4IAAAAAaNshKnLkjQGMWYT5EyclmXEJm8ZXSWDb&ved=0ahUKEwjR1JOCjf-PAxUXUWcHHUg9IXEQ4dUDCCE&uact=5&oq=adjustable+fuel+pressure+regulator+nissan+fuel+rail+adapter&gs_lp=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_EFhqEHecdnjv2SBwYyLjU1LjGgB7XnArIHBjAuNTUuMbgH4UXCBwgwLjUuNTEuMsgHiQI&sclient=gws-wiz
×
×
  • Create New...